Dana 30 - installation of ring and pinion gear

CJ780 · Mar 16, 2009

I need some installation instructions on installing the Dana 30 ring and pinion gears. I need specifications, such as how many preload shims to install etc.

I really appreciate someone helping me with this. Thanks.

Happy Joe · Mar 16, 2009

Check out the Dana/Spicer service manual sticky above...

http://www.jeepforum.com/forum/showthread.php?t=632181

Every thing you need should be in there.

Each case, carrier and gear set is a little different so the number and thicknesses of the shims needed to get a proper gear pattern is always different/there is not a fixed answer.

The gear setup is similar to that done in a D44 in the Extreme 4x4 program here; (But of course it is never as easy as they make it look on TV).
(Note; this link will cease to work when the episode is no longer available)

http://www.spike.com/full-episode/69-international/30661

Enjoy!

Dana 30 - installation of ring and pinion gear

Our Vendors

Top Contributors this Month

Recommended Communities