Jeep Enthusiast Forums banner
1 - 8 of 8 Posts

FamillyCJ7

· Registered
Joined
·
987 Posts
Discussion starter · #1 ·
Does anyone have any pictures of the original soft top hardware? Or where I can find replacement hardware for an original top? I think my dad ran over one of the bows for the soft top.

If anyone has any original CJ7 soft top hardware they aren't using especially the bows let me know.

I think the CJ7's had a bow that was behind the doors that had two poles that went to a windshield attachment.
 
Discussion starter · #3 ·
Most of it's for 88+ wranglers

I need the rear bow, horizontal support rod, vertical blade assembly (left & right), hold down straps for rear bow. I might have found the windshield bracket that holds the horizontal support rod that goes over the door to the windshield.
 
Discussion starter · #5 ·
This top is an original Whitco RoughRider top I believe. I want to get the original hardware together so I can sell a complete top with all the hardware. I'm a topless/doorless person. But if I could collect the original hardware needed then I could sell the top to help fund the project.
 
Discussion starter · #6 ·
I found the original install instruction manual for this kit it looks like I only need the Horizontal Bar that goes over the door opening on each side, the windshield bracket that they attach too and the rear Bow.

If anyone has these laying around let me know!
 
Does anyone have any pictures of the original soft top hardware? Or where I can find replacement hardware for an original top? I think my dad ran over one of the bows for the soft top.

If anyone has any original CJ7 soft top hardware they aren't using especially the bows let me know.

I think the CJ7's had a bow that was behind the doors that had two poles that went to a windshield attachment.
There is a guy in Kokomo IN you can call. 7564615594
 
1 - 8 of 8 Posts