I wasn't thrilled with the way the 2" spacer was flush with the rear post.
![Image]()
![Image]()
So here is my solution.: picked up some exhaust pipe adapters (Inexpensive, and available at any parts store.)
![Image]()
You can see that they fit perfectly. They will be attached with JB weld and a few self tapping screws.
![Image]()
![Image]()
![Image]()
They are a little longer then I wanted, but they should be fine. I will probably want extended bump stops, or hockey pucks on the spring perch because of the length.
I will report back after it's all installed.
EDIT:
It worked out great.
![Image]()
So here is my solution.: picked up some exhaust pipe adapters (Inexpensive, and available at any parts store.)
You can see that they fit perfectly. They will be attached with JB weld and a few self tapping screws.
They are a little longer then I wanted, but they should be fine. I will probably want extended bump stops, or hockey pucks on the spring perch because of the length.
I will report back after it's all installed.
EDIT:
It worked out great.
