[vitene4776]

So one of the first things I did when I got my 2013 Wrangler Rubicon was to replace the woefully underpowered factory headlights with JW speaker LED headlights. Overall, I'd say it's one of the best investments I've ever made on my money pit. Recently however I've noticed that the passenger side headlight has started to flicker, and today I verified that it's not an issue with the JW Speaker unit itself, but rather an issue with the connector on the wiring harness end of the headlight adapter.

https://tutuappx.com/ Vidmate
How would I go about replacing this connector? Are there kits out there that i can buy the connector with?

 

[TheBoogieman]

Wrong forum. This is TJ tech. You need to go here.

(59) JK Wrangler Technical Forum | Jeep Enthusiast Forums (jeepforum.com)

 

[Prot]

It’s a simple matter of buying new connectors, cutting the old ones off and splicing on the replacements. Don’t forget dielectric grease!