[pshivers]

No. The wires would have to go to the cylinder that would be on the top of the exhaust stroke when the coil cylinder was top dead center on the compression stroke. 1->4 3->6 5->2

Sent from my SM-J700P using Tapatalk

 

[pshivers]

Was the above order I wrote down correct? My 3.7 has a coil on every cylinder.

Sent from my SM-J700P using Tapatalk

 

[pshivers]

If you were dumping raw fuel into #2 and #4, you likely ruined the cat. I wouldn't do anything until you figure out the misfire on #4 though. Can you feel a misfire? You say it's running smooth though. Looking at fuel trims would give you an excellent direction to go. A cheap scan tool would be an elm325 Bluetooth obd2 adapter and the Torque app. It's what I use until I can afford a bidirectional one.

Sent from my SM-J700P using Tapatalk