6 year old Bilstein 4600 series shocks designed for minimal/non-lifted ride height vehicles and the factory Chrysler Upcountry springs from a 2002 Grand Cherokee Overland. The springs have 190K miles on them so I can’t guarantee they haven’t sagged. Ride height shown in photos.
Prefer not to ship but can if buyer pays actual shipping costs to destination.
One of the rear shocks has cosmetic damage to the housing from scraping against a sway bar end link bolt. Functionally they are all in good condition.
Front shocks include bilstein hardware, rear shocks reuse factory bolts. Front springs include the top and bottom insulators which are still in usable condition. The rear springs will require insulators as the old ones disintegrated/melted as evident from the rubber pieces stuck to the springs. It peels off easily.
Prefer not to ship but can if buyer pays actual shipping costs to destination.
One of the rear shocks has cosmetic damage to the housing from scraping against a sway bar end link bolt. Functionally they are all in good condition.
Front shocks include bilstein hardware, rear shocks reuse factory bolts. Front springs include the top and bottom insulators which are still in usable condition. The rear springs will require insulators as the old ones disintegrated/melted as evident from the rubber pieces stuck to the springs. It peels off easily.
