Jeep Enthusiast Forums banner
1 - 1 of 21 Posts

· Premium Member
9,798 Posts
Looks stock height.

The front springs from the factory had an arch of 5 3/4". It is measured from a line between the centre of the spring eyes down to the top of the leaf next to the centre bolt. This is at rest on the workbench, so when you install them the spring compresses. How much it compresses depends on the spring strength and the load.

As a guide if the imaginary line is in line with the top of the axle tube, it is not lifted. This is how your looks
  • Like
Reactions: wingless
1 - 1 of 21 Posts