Jeep Enthusiast Forums banner

TJ Gauges Won't Move

1753 Views 11 Replies 6 Participants Last post by  biffgnar
Hi! I'm having trouble with my '98 Wrangler.
It's 4cyl, 2.5L, manual engine.
A couple of weeks ago, the tachometer and speedometer would randomly drop (when the car was running) and come back on once the car came to a full stop, was put into neutral, or in some cases, when the car was turned off and turned back on. It continued for a few days then went away on its own. Sometimes, the airbag light would stay on.
Today, I turned my car on (after it running fine earlier) and the temperature gauge, oil gauge, gas gauge, and battery gauge did not move at all, but the tachometer and speedometer worked fine.
Any solutions? I've read some posts where cleaning/replacing the F10 and F17 fuses fix the problem, others where wiring was the issue.
1 - 1 of 12 Posts
was it raining or really humid when you were having issues??


pull your gauge cluster and look at the connectors on the back of it....they are known for bad connections and randomly loosing the cluster.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top