Jeep Enthusiast Forums banner
1 - 1 of 11 Posts

· Registered
2,398 Posts
HI.. NO you can't start it by turning the fan.. there is NO connection between the fly wheel/flex plate and the inside of engine or oil pan the oil pan is sealed at the block the parts well be in the bell housing at the bottom .. just pull the inspection plate at the bottom of the bell housing and maybe use a magnet and fish what you can out..
If you have a manual transmission parts could be caught up in the clutch (not good) if an automatic not much worry but try and get the parts out.. like i suggested..

good luck take care be safe
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.