Jeep Enthusiast Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
9,940 Posts
dumb question from a yj newbie...

has anyone tried unbolting the trac bars from the axle housings and simply strapped/zip tied them up high for easy re-install later?
Not here. There is no evidence my jeep ever had a track bar on the axles or frame side. Completely cut and ground off.

The sway bar disconnect is a good idea, but the track bar doesn't have any benefits to me so I did not make any effort to retain them.
 
  • Like
Reactions: The_Goob
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top