Jeep Enthusiast Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
288 Posts
Discussion Starter · #1 ·
Hey guys. Simple question I can't find the answer to. Does the low pressure return hose have to be a special material or can I use normal, rubber hose since it's not under pressure?
 

·
Registered
Joined
·
272 Posts
It needs to be resistant to oil breaking it down. Other than that there are no pressure requirements to worry about. Choose the correct size in an oil safe hose and install at your leisure...

-Michael
 

·
Registered
Joined
·
1,397 Posts
The cooler was the smallest one that Orielly sales (hayden) , like 30 bucks. The filter is listed by magna, it's a alum housing two piece with metal mesh screen and magnet inside. It's a quick connect design with an o ring to seal. Held in place by a snap ring. I mounted the cooler right under the front bumper by the front body mount with the filter accessible.
 

Attachments

1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top