Jeep Enthusiast Forums banner
1 - 1 of 483 Posts

· Registered
276 Posts
Good job you may regret sealing the blower motor with rtv if you ever have to replace it . unless you let it dry before you installed it If you used the factory clamps on the heater core I would toss them and use new screw clamps. I have made that mistake before and they leaked and made it look like the core was leaking.But it was the hose clamps and the coolant ran back into the car behind the carpet Great write up good pic's
1 - 1 of 483 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.