Jeep Enthusiast Forums banner
1 - 20 of 61 Posts

·
Registered
Joined
·
275 Posts
Discussion Starter · #1 ·
well this is my new baby. got tired of trying to finish my other one, and found its alot cheaper to buy things somewhat built. it came with RE 5.5" long arm with ACOS, rear soa with an 8.8 with disks. front has a powertrax no slip and teraflex high steer. gears are 4.10s and it has the 97+ swap. worn 35" toyos and 2.5" exhaust with flomaster 40 series.





 

·
Registered
Joined
·
275 Posts
Discussion Starter · #3 ·
since then i have swapped out the base model dash for one with full guages, replaced the front pinion bearings, made a inner steering box reinforcement plate and added a kevins offroad steering box brace. while i was doing the pinion bearing i put on a G2 diff cover and outter axle tube seals. got rid of the 35"s for some meteric 33"s (cooper STT), threw on some hood vents and a banks torque tube.
 

·
Registered
Joined
·
275 Posts
Discussion Starter · #5 ·
other than that i have swapped the 5.5" coils for 4.5" and raised the ACOS, added "fatmat" to the roof and rear of the cab. tranny temp guage and cooler and JKS adjustable bumpstops. looking at swapping in a dakota tank to get rid of the xj tank behind the axle and in the garage in now have a HP dana 30 with a detroit truetrack, and a rear xj dana 44 with an eaton e-locker both having 4.56 yukon gears. currently awaiting a quote on chromo axles and a sye.









my favorite pic

 

·
Registered
Joined
·
134 Posts
You have good taste sir, looks great!
 

·
She's my density...
Joined
·
1,462 Posts
Awesome pictures man, and great MJ!
 
1 - 20 of 61 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top