Jeep Enthusiast Forums banner

installed a bull bar on my '05 liberty renegade >>

8347 Views 9 Replies 6 Participants Last post by  frankiepan
for those interested in what it looks like on the 2005 model. Install took about 20-30 minutes. Instructions were included. You'll need a 17 and 18mm socket / deep socket and a torque wrench.

http://www.squarewave.com/army/andrew/jeepStuff/12272005-005.jpg

http://www.squarewave.com/army/andrew/jeepStuff/12272005-002.jpg

purchased here:
http://shop.store.yahoo.com/bbjeep2/bubargujeli.html
1 - 10 of 10 Posts

· Mr. Hyde!
Joined
·
28,049 Posts

· Registered
Joined
·
1 Posts
for those interested in what it looks like on the 2005 model. Install took about 20-30 minutes. Instructions were included. You'll need a 17 and 18mm socket / deep socket and a torque wrench.

http://www.squarewave.com/army/andrew/jeepStuff/12272005-005.jpg

http://www.squarewave.com/army/andrew/jeepStuff/12272005-002.jpg

purchased here:
http://shop.store.yahoo.com/bbjeep2/bubargujeli.html
Hey, this link says page not found. I was wondering if you had another link or know the brand/model that I can search.
 
1 - 10 of 10 Posts
Top