Jeep Enthusiast Forums banner

Info on our new Rancho RS5000X shocks

4824 Views 4 Replies 3 Participants Last post by  Rancho_Lifts
We are excited to launch our new shock, the RS500X. Using our patented valving system. Both on compression and rebound our valving is in play!
Here is a video that covers all the key points on this shock.

Here is a nice technical sheet on the shock.

1 - 5 of 5 Posts

· Vendor
779 Posts
Discussion Starter · #3 ·
I have an e-mail in on this as to see if the gas charge is high enough, that being said we design the mounting points for the various application can down, so that would be something that would have to be addressed.
I will up date on the possibility of a rod up mounting.

It WILL not work inverted, only our monotube could be run "upside" down.

Can I run the rears (rs55256) can-up? I need the space at the coil buckets.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.