Jeep Enthusiast Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
191 Posts
I added the 6.5" Polks to my Pods and the 5.25" up front with the Nalin adapters. The fronts were very easy to install with the adapters. The rears were a total pain! I like the fact that you can aim the highs on the 5.25's.
On the rear I had to cut off the lip all the way around the 6.5 to even get them to fit in the rear pods. Once it was all done, the sound is amazing. I cant believe how doing a little upgrade like this makes a huge difference in sound.

Got a pair of Nalins front speaker adapters for sale. (no screws)
 

·
Registered
Joined
·
191 Posts
Snip the factory plug and solder to the posts on the Polks.
 

·
Registered
Joined
·
191 Posts
Got my brackets from Nalin....they are awesome! Easy install. Now...for the 6.5's for the pods.... I dont see how you guys got them in there with no modification. Any help would be appreciated!
I had to cut the outer lip off my 6.5's to get them to fit. They fit great after doing that. Sounds amazing.
 

·
Registered
Joined
·
191 Posts
here is what I did:
cut the lip off the outside rim of the speaker
modified the factory speaker cover to fit over the 6 1/2" speaker
 

Attachments

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top