Jeep Enthusiast Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
669 Posts
Great write up, thanks. Just the thing I was looking for :)
 

·
Registered
Joined
·
669 Posts
I ended up buying the nalin plates and 4x5.25 Polks just recently. I am new to installing car audio and I'm wondering what is the easiest way to wire these speakers. Snip the factory plug and solder to the posts on the Polks? Or use some other kind of connector?

Thanks.
 

·
Registered
Joined
·
669 Posts
So ended up using female spade connectors crushed onto the wire after snipping the factory plug off. So far, so good. And like the previous poster, I also didn't have to cut anything. The Nalin adapters work nicely.
 

·
Registered
Joined
·
669 Posts
Don't forget to add polyfill!!!
Haven't done this yet but it's on the to do list. I'm interested to see what difference it makes.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top