Jeep Enthusiast Forums banner

Homemade Jeep Snorkel w/pics

193781 Views 136 Replies 74 Participants Last post by  sick93lx
OK, I've been trying to use the downtime for the Jeep projects(getting a ton of rain down here). Plus we don't have the nice terrain most of you all do just mud and swamps. So I just got in from making my snorkel. I couldn't justify the almost $400 bucks for the safari snorkle so I welded up 3" exhaust pipe and put on the ARB top.
One 3" U bend $24
One straight pipe $20
ARB snorkle top $ 77
Total $121
All I have left to do is connect it to my stock airbox with some dryer vent tube from Home Depot and some additional waterproofing under the hood.

Tried to keep it low profile for tree branches and wanted it to match the body line and windshield angle. Also I went through the hood because my hood is already dented and didn't want to ruin a good fender.

How's it look?:cheers2:

  • Like
Reactions: TerraIncognita
1 - 1 of 1 Posts

· Registered
94 Posts
The last home made snorkel that I saw was made out of white PVC (which included pink lettering all down the side on the specs of the pipe) siliconed to hell and beyond to the hole in the fender that looked like it was cut with a drywall saw. It was some serious ghetto setup the dumb kid had going on.

Yours is way, way, nicer.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.