Jeep Enthusiast Forums banner

Edelbrock Performer 600 cfm [$400]

14781 24
Product Information
Price $400
Rating 3
Average Price $246.81
Manufacturer Edelbrock
Recommended Yes: 22 / No: 2

Edelbrock's Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. Also included with every Edelbrock carburetor you will receive a owner's manual. These manuals consist of two sections; Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor will be included.
21 - 25 of 25 Posts

·
Registered
Joined
·
23 Posts
Price $150
Pros Gave me a lot more power than my stock 2bbl
Cons Haven't found any yet
Recommended yes

Comments: It gives you more power not as sluggish on my 304
 

·
Registered
Joined
·
23 Posts
Price $150
Pros Gave me a lot more power than my stock 2bbl
Cons Haven't found any yet
Recommended yes

Comments: It gives you more power not as sluggish on my 304
 

·
Registered
Joined
·
235 Posts
Price $500
Pros endura shine and runs well
Cons endura shine wears off
Recommended yes

Comments: decent carb but i wouldnt buy the endura shine since there is no need for it and think that for a off road use it would be better to get a different carb that works better on inclines and slopes
 
21 - 25 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top