Jeep Enthusiast Forums banner

Currie Enterprises Currectlync® Steering System [$400]

15857 Views 8 Replies 8 Participants Last post by  CharlieHo
Product Information
Price $400
Rating 5
Average Price $406.12
Manufacturer Currie Enterprises
Recommended Yes: 8 / No: 0

The Currie Currectlync® heavy duty tie rod and drag link system for TJ, LJ, XJ, and MJ vehicles features, a 1 ¼" diameter forged alloy drag link, and 1 ¼" solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8" thread tie rod ends with boots are included as well as the Currie heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than than the stock part.

http://www.currieenterprises.com/cestore/currectlync.aspx?id=913

Attachments

1 - 1 of 1 Posts

· Registered
Joined
·
65 Posts
Price $270
Pros Very beefy tie rod. This thing is stout.
Cons Replacement tie rod ends must be purchased from Currie.
Recommended yes

Comments: This tie rod and drag link setup is a great improvement over the stock tie rod and drag link. It gives a nice piece of mind when off road.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top