Jeep Enthusiast Forums banner
1 - 20 of 22 Posts

·
Premium Member
Joined
·
4,835 Posts
Discussion Starter · #1 ·
Nice looking Jeep man, This is your victory lap post up a bunch of pics!

Lutzke21​

1994 Jeep Wrangler S
I bought it used in 1996 and have been tinkering about on it ever since. I don't have the amount of money necessary to do what I want to it all at once, so I've spread it out over the course of a number of years. I purchased it in California before communism and while I was still in the Marine Corps. It's been with me through all of life's ups and downs; children, divorce, career changes, deployments, etc.*
• 2.5L low output four cylinder
• Banks header and catback
• Taurus 2 speed fan
• Converted to power steering
• Dodge Ram alternator*
• Dodge Dakota steering box.
• Stock 5 speed and transfer case
• Rubicon Express SYE
• Rubicon Express CV rear driveshaft
• Open Ford 8.8 rear with RuffStuff kit and diff cover
• Stock shaft and Dana 30 front
• 35x12.50 Goodyear Kevlars on 10x15 ProComp fake lockers
• Rubicon Express 4.5" Extreme Duty lift
• Off Road Technology bumpers front*
• Off Road Technology bumpers rear w/tire carrier
• Jeeptubes.com stinger
• Mile Marker 8,000 lbs electric winch with fabricated fairlead and light mount
• Home fabricated Jeeptubes.com fender flares
• Poison Spyder Crusher Corners
• Smittybilt side bars
• IPF headlight kit with some cheap H4 bulbs
• PIAA off road lights
• KC tail lights
• Rear LED reverse light bar
• Mastercraft Rubicon Dirtsport seats with Mastercraft 3pt harnesses
• Grant steering wheel
• Herculiner'd interior
• Raingler nets
• Bestop Full top with tinted windows, full bikini top, tonneau and slider uppers

The drivetrain currently sports a tired 2.5L low output four cylinder to the stock 5 speed and transfer that has a Rubicon Express SYE twisting a Rubicon Express CV driveshaft and open RuffStuff appointed 8.8 rear and a stock shaft and 30 up front. This is spinning slowly, some 35x12.50 Goodyear Kevlars on 10x15 ProComp fakies. The engine has a Banks header and catback, a Taurus fan, and converted power steering using a mix of YJ and ZJ parts. Also added a Ram alternator and a Dakota steering box.
The lift is a Rubicon Express 4.5" Extreme Duty lift w/ RE shocks. There is also a 2" BL that I may drop one day, but I recently lifted my tank into that space so I may have to clearance it first.
I have some one-off Off Road Technology bumpers (front and rear w/tire carrier). The winch bar of this blem front bumper was too low, so I chopped it and mounted a Jeeptubes.com stinger that I will eventually tie into a grill guard or the tube fenders. On the bumper is a Mile Marker 8,000# winch that works so far. The tube fenders are also Jeeptubes.com and some steel I got from old wall lockers that I formed and welded. I had some help from a friend on the fronts, and realized I had the skills to do the rears on my own. The rears are on some Poison Spyder Crusher Corners. The Jeep also has some older Smittybilt nerf bars that my wife needs to be able to get in the Jeep.*
I have an IPF headlight kit with H4 bulbs, PIAA lights up front, KC tail lights out in the rear. I built a license plate mount with light and moved the plate to the spare. I fabricated a reverse light bar with some LEDs that tucks in nicely under the bumper, we'll see if it survives better than the cheap Wal-mart lights that died there. Before I left on my current deployment, I put in some strip LEDs I'm trying to use as rocklights, but haven't hooked them up just yet. Maybe while I'm on leave.
Inside the Jeep has some Mastercraft Rubicon Dirtsport seats front and rear, with Mastercraft 3pt harnesses. There is a Grant steering wheel as well. I removed the carpet back in '99, poured in some Herculiner and never looked back. When the engine and automatic go in, the whole dash and related materials will change out. A set of Raingler nets keeps it all together in the back. I have the larger bikini top that Bestop has that covers the back and occasionally I run with a tonneau cover over the rear. Winter time I run a full soft top with slider uppers on my doors and tinted rear plastic. I fabricated a rear deck behind the rear seat that keeps everything from falling out.
I am considering a LQ4 or LQ9 possibly in the future.


 

·
Premium Member
Joined
·
8,779 Posts
Congrats man!
 

·
Registered
Joined
·
2,137 Posts
lol. I thought this was Gage!! looks Great!! :cheers:
 

·
Premium Member
Joined
·
9,601 Posts
It is an awesome Jeep. Lot's of hard work, blood and money.

But this is the 2000's Isn't every Jeep a winner? ;)
 

·
I pledge allegiance
Joined
·
4,421 Posts
Thank you for your service and congrats on a hard earned win. :congrats:
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top