[WSS]

Thank-you very much! well done sir.

WSS

 

[jchal3]

Here is a few....I'll take more as I weld them in

Sent from my SM-N960U using Tapatalk

Some updates

Sent from my SM-N960U using Tapatalk

 

[John Strenk]

Door handle for a Besttop CJ7 by juniors1.

https://www.jeepforum.com/forum/f8/3d-printed-soft-door-handles-best-top-4415439/

Thanks

View attachment 201031 CJ Handle.dxf

 

[ScroungerLee]

Probably the files wont do anyone much good unless they are running a CNC mill, but I want to show the two sided engraved key I made and use. Its a working key.

Here are DXF vectors. For this type of thing I use Vector Aspire and I didnt need a 3D model.

https://www.jeepforum.com/forum/attachment.php?attachmentid=3986739&stc=1&d=1621214478

https://www.jeepforum.com/forum/attachment.php?attachmentid=3986741&stc=1&d=1621214478

 

[John Strenk]

Probably the files wont do anyone much good unless they are running a CNC mill, but I want to show the two sided engraved key I made and use. Its a working key.

Here are DXF vectors. For this type of thing I use Vector Aspire and I didnt need a 3D model.

https://www.jeepforum.com/forum/attachment.php?attachmentid=3986739&stc=1&d=1621214478

https://www.jeepforum.com/forum/attachment.php?attachmentid=3986741&stc=1&d=1621214478

Oops, something went wrong...

Invalid Attachment specified. If you followed a valid link, please notify the administrator

 

[ScroungerLee]

If anyone wants advice or help or anything on a project like this just let me know so I can 'splain what I do.

 

[John Strenk]

I assume the front tire is for putting a key ring on it?

I love it but I don't have a CNC machine.

 

[ScroungerLee]

Yes that is for the key ring.

I wish I could make these for people but I need a working key in hand, and the vehicle for the "trial and error" part

 

[John Strenk]

Blank Key and let the buyer take it to a key shop and grind a new key they they did it in the 70's.

Or send you a new lock cylinder and key if you have time.

 

[ScroungerLee]

Blank Key and let the buyer take it to a key shop and grind a new key they they did it in the 70's.

I remember the last step in key copying was to go into the parking lot and try the key

 

[Clay Routh]

You guys are doing well.
Keep it up. Ya'll might inspire me to do some applicable diagrams myself.

 

[ddawg16]

Wish I had found this sooner

I'll update when I find it...
Cad file for bracket to convert from drum to disk on the AMC 20/....2 different versions
CAD for Dash overlay. I replaced my dash with an AL one missing some key 'holes'..
My dash overlay is carbon fiber....but you can use whatever you want.

 

[Extinct]

You guys are doing well.
Keep it up. Ya'll might inspire me to do some applicable diagrams myself.

Wish I had found this sooner

I'll update when I find it...
Cad file for bracket to convert from drum to disk on the AMC 20/....2 different versions
CAD for Dash overlay. I replaced my dash with an AL one missing some key 'holes'..
My dash overlay is carbon fiber....but you can use whatever you want.

View attachment 4134928

Would appreciate the caliper bracket file when you can find it!