Jeep Enthusiast Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Quadratec and Amazon sell a 12v Power Adapter mechanism. They state you can't use two in any kind of daisy-chain config. On my '07 JK I have a power outlet on right and left of center console--I don't see why I could not hook one of these to each. I am starting to want to install some things in the cab (alarm, light switch, camera,..) and like the clean setup of these. If I watch amperage I don't see why I can't hook several devices to one of these as well (they are fused). Anyone have experience with these--am I thinking about it wrong. Thanks.
 

·
Moderator
Joined
·
5,559 Posts
Both those circuits are fused at 10A. As long as you don't exceed 10A, you can do that. I used the Quadratec one on mine. It works well.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top