hey man how do you like that front driveshaft? im at 6.5 LA and am looking for a good drive shaft. did you just call them up, tell them your lift height and setup and they made it? done deal? truck looks sick as hell man. good work.
Atlas92 Build Thread "99 WJ"
16
I have been having a few people asking about my rig so I am going to start a build thread. I got my jeep in Feb of 2010 with about 140,000 miles. It has the 4.0L, np242, d30/35 and 3.73 gears.
The earliest pic I have of my jeep, stock suspension, 245s, 1.5" RC wheel spacers, and cladding painted black.
![]()
![]()
About a week into owning the jeep, I got a hole in one of my fuel lines up by the gas tank, so I decided to do a tank tuck while I had the tank out.
![]()
![]()
![]()
For about the next month after that, I started stocking up on lift parts. I think this cheepest way to get 6" of lift. I think I am right at $1000 in parts at this point in time.
RCX 4" lift
Rusty's 2"bb
IRO upper adj control arms
IRO fixed lower rear control arms
IRO HD Dual SS
I put the lift on buy myself (took 10 hours) so I didnt really care to take and pics in the process of putting it on. It measures 6.5" actual lift I dont have a t/c drop and I dont have any vibes.
The only good pic I have with stock wheel and tires.
![]()
I got at set of half used Baja ATZs from a friend of mine for free. 35x13.50R20. I got a set of 20x8.5 gunner 5s from discount tire. So for under $700 total I have a good set of 35s mounted and balanced.
![]()
![]()
![]()
![]()
![]()
I was having a lot of bump steer so I got rid of my little RC adj track bar. I would not recommend it to anybody. I bought an IRO adj track bar form Bama_WJ for a good price and it solved my problems.
![]()
I cleaned my headlights with the 3M kit that goes in the drill. It did wonders for my lights.
![]()
I then tinted my turn signals and side markers. I also added some tow hooks and trimed my bumper
![]()
![]()
![]()
The earliest pic I have of my jeep, stock suspension, 245s, 1.5" RC wheel spacers, and cladding painted black.
About a week into owning the jeep, I got a hole in one of my fuel lines up by the gas tank, so I decided to do a tank tuck while I had the tank out.
For about the next month after that, I started stocking up on lift parts. I think this cheepest way to get 6" of lift. I think I am right at $1000 in parts at this point in time.
RCX 4" lift
Rusty's 2"bb
IRO upper adj control arms
IRO fixed lower rear control arms
IRO HD Dual SS
I put the lift on buy myself (took 10 hours) so I didnt really care to take and pics in the process of putting it on. It measures 6.5" actual lift I dont have a t/c drop and I dont have any vibes.
The only good pic I have with stock wheel and tires.
I got at set of half used Baja ATZs from a friend of mine for free. 35x13.50R20. I got a set of 20x8.5 gunner 5s from discount tire. So for under $700 total I have a good set of 35s mounted and balanced.
I was having a lot of bump steer so I got rid of my little RC adj track bar. I would not recommend it to anybody. I bought an IRO adj track bar form Bama_WJ for a good price and it solved my problems.
I cleaned my headlights with the 3M kit that goes in the drill. It did wonders for my lights.
I then tinted my turn signals and side markers. I also added some tow hooks and trimed my bumper
