Jeep Enthusiast Forums banner

Any suggestions for a good exhaust system

957 Views 3 Replies 3 Participants Last post by  Itsa03Jeepthing
Hi, Any input would be greatly appreciated. Whether you can tell me what to stay away from or what's my best bet or at least a good option. I replaced my exhaust system with a so-called performance exhaust system (muffler, pipe, tip) right around 3 years ago. I do live in New England where the roads get coated with salt but 3 years? Come on. Already needs to replaced! Can anybody give a good recommendation? What brand or part # should I get? What should I stay away from? Its a 08 WK 3.7.
Thank you in advance!
1 - 4 of 4 Posts

· Registered
Joined
·
9 Posts
As a former resident of the rust belt (NY) all I can tell you is pay whatever the additional cost is for a stainless version of your new exhaust. Avoid coated mild steel (nothing aluminized), probably what your current parts are made of.
 

· Registered
Joined
·
15 Posts
Discussion Starter · #4 ·
Yes thats exactly what my current parts are made of. The hangers completely rusted off and left holes in the pipe. Does anybody have experience with the Gibson SS cat-back system? Its a lot more $ than the non SS version but if it's a decent brand and sound ok I'm thinking of trying that system out.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top