[MarkHat]

I have an rev 2.5" lift, and I'm tired of wrenching to disconnect my sway bar. I have the geometry brackets and I was wondering if there is a stock sized quick disco, or if i were to get discos for a 3" lift and took off the geometry bracket if that would work. Thanks.

 

[mrwhipple]

Maybe check out JKS.
I'd keep the geometry brackets on there.

 

[MarkHat]

Maybe check out JKS.
I'd keep the geometry brackets on there.

Yeah, I guess I would need to get the 0-2" lift arm because its using the stock arm right?

 

[AlbertaJeeper]

Yeah, I guess I would need to get the 0-2" lift arm because its using the stock arm right?

That would make sense if you keep the relocation brackets in place. Check out the forum on the AEV website as well, as this has likely been asked there before.

 

[ncb]

I would remove the silly sway bar link extension brackets that AEV includes and get quick discos that are made for a 2.5" lift.

 

[MarkHat]

I would remove the silly sway bar link extension brackets that AEV includes and get quick discos that are made for a 2.5" lift.

I wish I read this sooner. I ordered the jks quicker discos for a 0-2" lift assuming I could use the brackets. however the arm mounts don't fix through the holes in the bracket and would need to be drilled out to fit. however, i'm just going to return them and get the 2.5" discos. Looks like i'll be driving a boat for a few days lol

 

[SLADE]

Currie Antirock and never disconnect again.