Jeep Enthusiast Forums banner
1 - 2 of 2 Posts

·
Registered
1974 Jeep CJ-6
Joined
·
6,009 Posts
What is your planned use after the lift? What is your fabrication/mechanical skill? For a 4" lift on stock axles, I would stick with a spring under and do the draglink and tierod flip inserts from goferit and stay with the stock pitman arm.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top