Jeep Enthusiast Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
190 Posts
The Susquehanna motorsports light harness is very well made; I have been running one for quite a few years with no issues. There is a substantial difference in their quality vs what you may find on Amazon or Ebay.

Voltage drop or light duty wiring is part of the issue, but the stock sealed beams suck. There are a lot of good LED options (JL, Trucklite, etc.) however you may end up spending $500-600. Many may tell you that the LED may not be as illuminating as a typical halogen due to the color of the light.

Hella e code housings have an optical defect. When the low beams are aimed properly, the high beams are too high. I highly recommend the Cibie e codes (82440) and even more so the Koito e codes (Toyota PN 90981-01035). The Cibie housings do not come with bulbs, however, the Kotio's do. The Koito's are a noticeable upgrade over the Cibie.
 
1 - 1 of 1 Posts
Top