Jeep Enthusiast Forums banner
1 - 13 of 13 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #8 ·
And I looked I to it more today I used a power probe and supplied 12 volts to the violet wire and the reverse lights came back on so I think that the ecu isn't supplying 12 volts to the neutral safety switch
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #19 ·
So I was working on the nss again and I figured I wasn't getting any power to the tcm I applied 12 volts to the tcm fuse (was not thinking) and I am pretty sure I applied the 12 volts to the ground side of the fuse now my jeep won't start at all gauges don't work I don't hear the fuel pump kick in and it just cranks and cranks but doesn't catch do you have any ideas? I am without a vehicle and desperate!
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top