Jeep Enthusiast Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Used it to replace the "spacer kit" that came with the used purchase. The kit went together well. I took the opportunity and replaced all the rubber components front and rear as well since they were showing their age after 160K miles and 13 years. After I assembled the fronts I noted that the strut rod nut bottomed out with about a 1/4 inch yet to go. Had to disassemble them and add 3 washers to the bottom of the upper mount. Gave me a nice even 2.5 inch front and rear. Have 2k miles on it now. Rides a little hard, but handles well.
 

·
Registered
Joined
·
18 Posts
I really do not have any experience with the jeep yet. Still trying to get it setup for inspection after I purchased it. It was used mainly on weekends off roading and I need it to be an occasional driver on the street and haul my trailer for short distances.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top