Search Results for ‘wiring harness’

Hello! I'm in the process of an LS swap. I started with the stock 4.0L 42RE auto and have installed a 2005 5.3L / 4l60E using many parts from Novak Industries for the swap. I intend to keep the Jeep wiring harness to retain factory gauges/controls along with the re-worked (by Novak) GM harness...

I'm new to this forum and new to forums in general but definitely not new to making bonehead mistakes and later realizing I should have asked someone BEFORE I started a project. I want to start upgrading my old CJ-7 (which had a 360 in it when I bought it years ago) and thought I'd start with...

I did a search for the use case I have for wiring some auxiliary lights to come on with the high beams, and I couldn't find the exact answer I was looking for so trying it as a fresh topic. I have a set of light pods that I'm planning to mount behind the grill of my WK2 GC, and I'd like it to...

So my co-worker has a 2012 JK Sport Unlimited and had an oil leak. He took it into the dealership, they initially diagnosed as a Valve Cover Gasket leak. Now they are saying that it is a bad Oil Pressure Sensor gasket that has been backfeeding into the wiring harness. They are now...

I've been a long time reader on this great site. Finally I have registered and hope I can get some help with my WJ. Cheers, Scott 99' 4.7 swapped into an 01'. Job nearly complete. Wiring harness issues. The 99 had 3 cats, 01' has 1. 3 Extra plugs remain from engine wiring harness

Hey All, New to the forums. I've always been the type of person to troubleshoot almost everything on my own, but for the first time I'm stumped. 97 ZJ has a constant 2.5 amp draw on it, which in turn eventually kills the battery. Used to be a daily driver in HS, now getting handed down to my...

I just went through and installed new ac evaporator and heater core. Of course that meant the whole dash came out and went back in. I thought I was being very meticulous with uninstalling and reinstalling everything correctly, taking pictures, etc. But..., when I was fastening the covers...

Hoping someone can help me out here. Over the past two weekends, I've been installing a new wire harness on my 1983 CJ5. Today, when I started testing all the circuits, etc., only a couple of minor issues had to be addressed. It appears now that she's ready to go, EXCEPT for the front side...

on the wk, i have stock wiring harness plugs on my bumper for the foglights. what do the 3 wires stand for? i know one is ground(black), one is power(red), i dont know what the other is. cCan someone tell me what it is? and could i splice these wires to set up LED foglights instead of the stock...

Hi All, So my jeep's front passenger door says that it is open, even when closed. This has disabled the jeep for quite some time as the lights stay on and drain the battery. Reading and searching has led me to believe the wiring in the door (or in the door frame rubber boot) has shorted, as...

Long time reader but my first time post. I'm hoping someone here can help me out. I have an 89 YJ which had a 4.2 in it. My 4.2 died so I decided it was time to swap. I started the swap with a 4.0 out of a 91 Cherokee. Everything is gone smoothly. But I can't figure out the wiring harness...

First post here, so I have a Cherokee that the harness and renix in CPU are bad does anyone have a site that sells either or both of these? I couldn't find the right harness on painless. Thanks in advance (and yes I have searched but I'm new to wiring)

I started installing a manufacted harness. I have the tail, front and engine compartment completed. My problem is the engine cranks and wants to start but doesnt quite catch. It was suggested I check voltage at the pos side of coil. When the key is on, I have full power (12.45) but while...

:|83 Scrambler, 1990 block 4.0 with 1995 engine accessories, mated to Dana 300 , with Chevy 700R4 automatic transmission with a B&M Mega shifter. Need a little help here. I'm trying to figure out how to integrated my new MPI automatic transmission harness into my old 83 wiring harness, along...

RE: 1992 Jeep Wrangler YJ 2.4L I was off roading 2 weeks ago. When I returned home I found part of the wiring harness ripped off dangling underneath the YJ. It is to the O2 sensor. The jeep was still running fine for a few days, then it started misfiring running very rough and now will not...

RE: 1992 Jeep Wrangler YJ 2.4L I was off roading 2 weeks ago. When I returned home I found part of the wiring harness ripped off dangling underneath the YJ. It is to the O2 sensor. The jeep was still running fine for a few days, then it started misfiring running very rough and now will not...

Did a Recent Motor Swap On My 97 Cherokee In Need Of Some Answers Hey guys Stumister12 here! I Recently did a Motor, Tranny, Transfer Swap On My 97 Cherokee and I replaced it with all 1999 Cherokee Parts I ran into pretty much No problems besides common ones. The Only problem that has my head...

Awhile back I saw that one of the members on either this forum or another was making their own headlight wiring kits with relays and was selling them to other members, I HAVE used the search feature but have had no luck finding his contact info. Does anyone have a link for this, or information...

Squirrel got under hood and chewed thru wiring harness at battery compartment - need the harness with the male plug at the battery tray end for 2008 Wrangler. Have attached photo of the male plug on the harness needed. Need part number or source for the harness. Thanks for any help!