Search Results for ‘vortec’

For my birthday I acquired a 1979 CJ7 with an AMC304 swapped in, but on the hour and a half drive home it ate some crankshaft bearings. The whole thing needed a bit of work work, so I decided to do a full frame up restoration (not going full original, but as reasonably close as I want) but it...

5.3 tj wiring harness Alright to start off I am swapping a 5.3 vortec into my 2003 wrangler. I have the complete wiring harness computer fuse box, everything. I want to hook it up using stock gauges, a/c and want it to look like it came out of the factory like that. I could send it to novak for...

Alright just to start off I really do not know anything about wiring and I am not a fan of it but Im going to try to tackle this on my own and save a little money. I am swapping a 5.3 vortec into my 2003 tj.I have the complete wiring harness with the fuse box and the computer. I am wanting to...

As you can guess I have an '87 YJ with a 4.2 (258 cubic inch) carburetor 6 cylinder that's in real rough shape (with 185,000 miles). Also can pick up a complete '96 S-10 Blazer (4WD) with the fuel injected 4.3L Vortec (very strong, durable, dependable motor for it's size) which has a rebuilt...

Hey guys, I have been working on rebuilding a 83 CJ7 (with 3.54 gears, T 176, Dana 300, and 33"tires) for a while now and after finding out my 4.2L is blown, ive decided to do a swap. I like the idea of the Fuel injected vortecs, good power and decent MPGs. mainly im looking at the 5.3l and...

The primary focus of this is the 2003-2007 5.3 v8 vortec engines. There are few differences between these engines and the 98-02, or the 4.8, 6.0, or the car LS series. For the most part all the block parts will be bolt on between them. Flywheels, camshafts, heads. There are a few differences in...