Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 19 Results
  1. Suspension Parts
    Selling my gently used JBA upper control arms for a lifted WK or XK. I'm putting my 06 WK somewhat back to stock before it goes up for sale. Maybe someone can get some use out of these. My Jeep wasn't really lifted enough to take advantage of them, plus I never go off-road. I just thought they...
    $200 USD
  2. WK Grand Cherokee & XK Commander Forum
    Howdy, I'm looking to replace my UCAs with something heavy duty. Obviously I'd love a set of H&M engineering's UCAs, but those seem to be impossible to find these days (hard enough when they were made). What alternatives should I look for, and how much should I expect to pay roughly? Thanks all!
  3. TJ Wrangler Technical Forum
    How do you change out the upper control arm bushings on the axle end??
  4. TJ Wrangler Technical Forum
    I managed to shred the inside of my lp 30 last week and need a stronger and cost effective solution to replace it with - HP 30. With the cost of a new ring and pinion for my old lp axle and the cost to have someone come to my house and set up the new gears I have been considering getting an hp...
  5. TJ Wrangler Technical Forum
    I have a DC shaft and a SYE installed right now, they went in when my trans and t case were rebuilt, the plan was for a 2" lift and a TT sooner, but I got screwed over by a shop and that's where that money went. I have a DC shaft right now and an 8.8, I don't think my drive shaft angle is...
  6. TJ Wrangler Technical Forum
    my upper, rear control arm mount/bracket is broken and ive been searching online forever and havent found once single replacement.. idk if its the wrong name or what.. its just where the rear upper control arm connects to the frame. not the axle. can someone please give me some info or even a...
  7. TJ Wrangler Technical Forum
    I am hoping that someone can chime in providing input regarding moving the front axle forward ~1". What are the pros/cons of pushing your front axle forward 1"? Would I completely be screwing up my alignment, track bar location? At the moment I have adjustable control arms for the bottom...
  8. TJ Wrangler Technical Forum
    The Teraflex front upper "monster" style control arm has 2 holes for the side that mounts to the axle. I am using std length, do I cut the outer hole or leave?
  9. TJ Wrangler Technical Forum
    Trying to find someone that has Teraflex front upper monster style control arms installed. Had a couple mounting questions.. There are 2 holes for the axle end, which hole should you use? With the CA fully collapsed and using the outer hole, the CA is to long by 1/2", which I can adjust my...
  10. TJ Wrangler Technical Forum
    So I have put countless hours into the swap info on a 00TJ. For those that put in a cherokee dana hp30, who had to put adjustable upper control arms? These cost almost as much as the axle I am looking at and would almost rather just get a TJ d30.
  11. TJ Wrangler Technical Forum
    Anyone else using the Teraflex upper front monster style control arms (std length)? About to mount a pair up and wanted to double check regarding which way the frame end is mounted. The frame end mount contains a triangle shape and they don't provide directions to what direction the angle is...
  12. TJ Wrangler Technical Forum
    OK, I added the Adjustable Uppers to the Rear to do away with the drop Transfercase brackets and rolled the Pinion to 14* and the Drive shaft to 15* and when I "Get after it...:rofl:" in 1st and 2nd it shakes. Anyone running like 2*-4* on there DCDS?
  13. TJ Wrangler Technical Forum
    When i bought my jeep used it had a 3-4" lift, crappy adjustable LCAs in the front w/ stock UCAs. I since replaced the upper UCAs w/ adjustable ones because i had a bad bushing in the stocker, so it would be a good time to get adjustable uppers. I then noticed that my left lower control arm...
  14. TJ Wrangler Technical Forum
    Hey, I have been doing some research and found DND offroad, they will build me front and rear, lower, double adjustable control arms with Johnny joints at both ends for $450. They make them out of square tube which from what I've seen is best, any comments? Just wondering if anyone has used...
  15. TJ Wrangler Technical Forum
    There are a ton of threads pertaining to both of my questions but each have 100 different posts that dont actually answer the question. 1997 Sport 4.0 5 Speed First: According to the haynes manual, the TC and Tranny are removed as one unit. I've pieced together that the SYE can be done with...
  16. TJ Wrangler Technical Forum
    What is the lenght from bolt hole to bolt hole of the factory upper control arms on a tj
  17. TJ Wrangler Technical Forum
    What is the lenght from bolt hole to bolt hole of the factory upper control arms on a tj
  18. TJ Wrangler Technical Forum
    So, I have my rear axle in, centered, solid. It is amazing going from 3.07:1 to 4.88:1 on 35s. I am very pleased with it. My issue is that my adjustable UCAs (I have an AA SYE) are not long enough to get the axle pinion up where it belongs. I wish I had it welded at the angle it would be...
  19. TJ Wrangler Technical Forum
    01 tj 33s, im sitting at 3in sl and 1.25bl and i am putting 2in coil spacers in it, my question is control arms. I heard the front uppers can be fixed and the rear lowers can be fixed, and the front lowers and rear uppers need to be adjustable. But i would imagine they would all have to be...
1-19 of 19 Results
Top