Search Results for ‘trac bar’

This one is for the new YJ owners or folks that have been on the fence about trac bars. Obviously the topic has been beat around like a dead horse here and everywhere else, But I still see it being asked constantly. So I made this video to post up for when people ask about it here, and in...

Every bump, pothole the rear right side generates three noises: a bag of aluminum bats, a large empty can/bucket and a squeak like the roof is coming off. After three weeks of ownership I broke down from the rear trac bar bolt missing, almost jumping a lane. Any thoughts on what this can be?

I have most of the parts together to do a spring over conversion on my YJ. I'm currently running a Rough Country 4" lift and I'm looking for more "compliance" out of my Jeep. I am using stock YJ springs, an 8.8 with 4.10's and limited slip. I have a SYE and a CV driveshaft. I'm going to run my...

I've always experienced loose steering on my zj. A while ago I was driving and the steering box had froze and ripped off the engine compartment. I had it towed and the mechanic threw in a new one. Ever since I've had to steer a lot just to get it to drive straight! I originally took it to a 4...

I recently purchased a 96 grand cherry from a dealership. The previous owner rhino lined/linexed under the jeep. The problem is that i need a new trac-bar and i cant tell the size or brand of the lift kit to get a replacment. Is there anything or anyplace i can go to figure this out or am I...

So... I was wondering if anybody knows if the joint, fitting, whatever it's called on a front trac bar is replaceable. It's not the axle side, it's the one that mounts to the frame. Almost looks like a ball joint, heim joint seems to ring a bell. It's on a TJ. stock front trac bar. please and...

Hello, I'm hoping to gain some knowledge from this wast community of jeep experts, I recently bought a 99 Xj that is my daily driver, but would like to take it out for some mild weekend fun. I am in the process of installing a RE 3.5" super ride. My questions are: 1.Do I need to buy an SYE an CV...

Long story short I am back in the market for a lift kit (had ordered, yada yada yada). Now that I am looking for them again I am seeing more of a difference in kits. Some come with new, fixed length track bars, some come with a new bracket, some an adjustable bar, and some none at all. Which...

Okay, so I ordered a Currie front adjustable track bar from Gerald at Savvy, and now I'm needing a rear track bar relocation bracket for a 4 inch lift. Which one should I go with, and how much should I pay? I've seen some for as little as 20 bucks on ebay. Any ideas? Thanks

So my dad offered to help fix my jeep since I'm out of money. He doesn't get the whole Jeep thing, so he was gonna make me take it to a mechanic. ...not gonna happen! Anyway, to correct the death wobble, I was holding out for a new kevinsoffroad trac bar with fancy bracket. Then, I found the...

So my thrust angle is a positive .43 degrees. By my techs calculation thats a fifth of a degree over spec...subsequently it needs to be fixed. I have a 2" coil lift which is more like 2.75" in the rear. Stock control arms and track bar. I posted a thread on this last week so forgive me if...

Any tricks for getting the t-55bolt out...I have i unscrewed 90% of the way and it didnt come out at an even angle...The threads look pretty torn up...I have tried everything to get this bolt out so I can install my relocation bracket...the bolt is at a place where it just keeps on spinning...

Once upon a time, a regular nut was installed on my front track bar on the axle end. I've ignored it until now because I knew it would be a pain to get off. But now I have a new front track bar to install, so I have to get it off. How to I remove the bolt? I can't get a box end wrench in...

Okay so it seem my axle sticks out further on the drivers side more than the passenger and while I do know that it's a trackbar issue, my Nth suspension already comes with a specific front trackbar relocator and I have already isconnected it an shook the vehicle, then reconnected but it's still...

On the axle end of the JKS adjustable tracbar, the parts list refers to the rubber bushing as "OE Rubber Bushing" - and provides a part number - PN 313320. Figure can be found here, have to drill down 1 layer in the OGS125. JKS Manufacturing: REParts Does this mean that a rubber bushing for...

Whats the benefits of buying an adjustable front Trac bar for my 04 TJ? My Jeep is primarily a trail rig only, and hardly ever driven on the street. Would the track bar help me articulate better, or help wheeling at all? Im also in the market to get new upper control arms, a new tie rod, and...

I have a automatic 97 TJ with 138K miles. I had the car up on a lift when replacing shocks. I moved the rear wheel back and forth from driver side to passenger side, pushing and pulling as if your were taking the wheel off. I noticed a little play as I was pushing and pulling the wheel. Probably...

I am new to the forum and I have to say this is one of the best sources of information that I have found. So I picked up my 98 Sahara a couple of months ago and it is time to let the mods begin. I have been reading the forum here for several weeks now and I am pretty sure where I want to go...

I have looked through the faq and searched but can't find an exact answer for my question, its a simple one...........how much suspension lift can I do with stock trackbars and bumpstops and still be able to align it? Any help is greatly appreciated!

I've been pondering this for a while and would like to get everyone's take on it. The desired end result is: 1) Double-shear frame mount 2) Works with lower (and hopefully any) lift heights 3) Doesn't contact the tierod or diff 4) Doesn't require use of DPA 5) Maintains correct geometry with...