Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 47 Results
  1. WJ Grand Cherokee Forum
    Has anyone done the IRO over-the-knuckle tie rod? I smashed my steering stabilizer today and now I’m looking to create more ground clearance without a higher lift (budget build, and my garage can’t accommodate a higher lift). I know the Trailforged kit requires a drag link and track bar to go...
  2. WJ Grand Cherokee Forum
    I've been in the process of eliminating death wobble and was successful for about 6k-10k mi, and now it seems my ball joints are going as well as my cheapo tie rod ends. Which got me thinking with my current 4" lift and a 6" lift in the works, would it be worth it to upgrade the tie rods/tie...
  3. JL Wrangler Technical Forum
    I had the 2.5 ton RPM steering kit installed on my jl back in May. I drove it a week and by the end of the week both screws on the tie rod were unscrewed and came loose, so I had really loose steering, and I drive 100 miles a day for work. I went back to the shop and they fixed the issue, they...
  4. MJ Comanche Technical Forum
    Hi, I have been dealing with some horrible death wobble on my 89 MJ. I can’t seem to find a website with the tie rods and a drag link. Only find 91 and up. So I guess my question is will the 91-92 ones fit my 89? I would think they would but I just wanted to confirm
  5. Drivetrain
    Zip29621ModelWranglerKeywordsLJ, Dana 44, TJ, axle, tie rod, drag link, lift kit, bumper, tire carrierStateSCCityAndersonPrice1400ShippingLocal Pick-up ,Will ShipPaymentPayPal ,Check/MOI am finally making progress on my LJ build. I drove it some after I got it but pretty much parked it for a...
  6. WK Grand Cherokee & XK Commander Forum
    Some may know that I run the YouTube channel, My Jeep Story and on that channel, I do some product installations and other videos based on my WK. Moving forward, I will start doing what I plan on doing tonight for most every product and video by posting up here for other discussion. JeePerf...
  7. TJ Wrangler Technical Forum
    So I managed to bend my toothpick of a tie rod in Moab last month. In my parts pile, I have a heavy duty steering setups I picked up for a YJ. Just a tie rod, drag link and HD Moog tie rod ends. Seems to me it ought to fit a TJ, but I'm not sure if the geometry is compatible. Anyone tried? Seems...
  8. JK Wrangler Technical Forum
    Whats up guys, I have been having a problem with my steering going to the right when i let go of the steering wheel. As well as feeling resistance in the steering wheel at a stop, ie. when i turn the steering wheel half turn and let go it goes slings back. Also i took a look underneath the...
  9. WK Grand Cherokee & XK Commander Forum
    2006 Grand Cherokee 4x4 3.7 Laredo Noticed my boots had tears in them this morning. I'm unable to locate a part number or store carrying the inner tie rod boot for my truck. I ordered a pair from Detroit axle on eBay and they don't seem to be the right fit. Anyone with more information would...
  10. XJ Cherokee Technical Forum
    Just got my Cherokee and starting to do some work....local mechanic keeps telling me to "return it" and is pushing his Cherokee as a replacement... He failed my inspection for "Safety" and came up with the estimate below.. Both side springs weak/broken water pump tube rotted out U joints front...
  11. XJ/MJ Cherokee Non-Technical Forum
    I was wondering what you guys would suggest to replace my currently steering stabilizer with? I know stock ones are sufficient, but mine is currently leaking and needs to be replaced. 2001 XJ Sport - I am going to be lifting my Jeep with a RE 3.5" lift, Bilstein shocks, 31" tires and most...
  12. ZJ Grand Cherokee Forum
    So I just got back into Jeeping via my grandparents giving me their 1995 ZJ Orvis Edition. I've been frantically working on it and getting it back into clean condition. It had been sitting for about three years. Before they stopped driving it due to them both simply not being able to drive any...
  13. YJ Wrangler Technical Forum
    so the tie rod on my jeep has been bent back a little from hitting a rock or something, and when i turn in either direction the tie rod rubs the diff cover, i found a tie rod on morris4x4 for 79$, but it doesnt come with the ends, so how hard is it the get the ends off my bent tie rod?
  14. Jeep CJ Forum
    I have a tie rod that just barely rubs on the leaf spring. The tie rod is new but the old one had the same issue. This is on my 85 CJ7. Any suggestions on how to create some space between the spring and the tie rod? I got the CJ7 a few months ago and do not know any history on the vehicle.
  15. JK Wrangler Technical Forum
    Hey guys, hit a mud hole a week ago going pretty fast...my bad. Knocked the alignment out and took it to a 4x4 shop to get it realigned. The guy said everything underneath basically had to be adjusted. My problem is that after hitting the mud hole the car will swerve when I hit bumps and the...
  16. TJ Wrangler Technical Forum
    Has any one else had an issue with replacing the the drag link in a 2000 TJ. I have had issues with the threads not being long enough to be able to put the castle nut on. I have ready that a lot of after market manufactures have the wrong specs. Does anyone one know which brand has the proper...
  17. TJ Wrangler Technical Forum
    hey guys, i bottomed out in the snow (turned out to be ice) the other day, i had to rock it front to back to get it out. during the last session of this there was a loud popping noise as is something snapped in the front right. i haven't driven it since accept for home which wasn't far. any...
  18. Engines & Drivetrain
    A couple months ago i started to notice a popping/clunk noise coming form the driver side front wheel area, almost right under the break pedal. The noise only engages when i put on the break and it happens about 80% of the time. I just had the wheel bearing and CV axel half shaft replace on...
  19. Jeep CJ Forum
    I have been working on restoring an 84 CJ7. I've been using some parts from a 79CJ7 but clearly didn't do all of the proper due diligence in keeping track of the numerous difference between the model years. My tie rod on my 84 was bent but on the 79 it was in nearly perfect condition so i had a...
1-19 of 47 Results
Top