Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 68 Results
  1. WJ Grand Cherokee Forum
    I simply in need of advice on the following right now: is it normal to have this much play in my front sway bar? Specifically a 0.5" or so left-to-right "popping" motion via a simple push/pull. Video: Context: A few weeks ago, I started getting a death wobble (DW) on a long road trip. Bad...
  2. TJ Wrangler Technical Forum
    I made a thread about this already but I’d thought I’d just make a new one. I have a clicking or popping noise when I am accelerating while turning left. I jacked up my Jeep and shook the wheel and there’s no play. I spun the wheel and the U-Joint does not have any play. I grabbed and shook and...
  3. JK Wrangler Technical Forum
    Hello, I’m having an issue with my rear links rubbing on my upper control arm brackets… my Jeep does have a 2” BDS lift, and it’s on 33s. I had the stock links on prior to today, and I replaced them since the boots went bad. The replacements don’t seem to have enough clearance now (only about a...
  4. Suspension Parts
    I have an AntiRock front sway bar kit that fits a 1997-2006 Jeep TJ. It was in good working order when I removed it from my Jeep last night 5/21/22. It seems that it would be expensive to ship so I am pricing it for a quick local sale and not interested in shipping it. The AntiRock is located...
    $175 USD
  5. Jeep Buying Forum
    Back in October, I got the chance to spend some time with the 2020 Gladiator Rubicon. When I was young I spent some time in older CJs and in my adolescence I had a 4x4 so I spent some time off-road. I had all sorts of notions about Jeeps. I've gotta say, I was way off base. Newer jeeps...
  6. WJ Grand Cherokee Forum
    Anyone else ever had an issue with the sway bar making contact with their springs after installing a lift kit? I am still in the middle of installing the lift but the front is completely done and the swaybar now hits the spring if you swing it up or down...any help or ideas for solutions would...
  7. JK Wrangler Technical Forum
    So I have searched the web and the threads and can't seem to truly find anything that helps. I have a 2010 Rubicon and my issues started when I hit a speed bump on my way to work and my swayer light started flashing. I checked my fuses and disconnected the battery for about 15minutes but...
  8. JK Wrangler Technical Forum
    Good day all, I've been a member for a awhile but this is my first post and would greatly appreciate some help. I just replaced my non-working smart-bar (Rubicon sway bar ) and harness and ran into a question when wiring into the TIPM. Can someone who has done this job before please let me know...
  9. WK Grand Cherokee & XK Commander Forum
    I need some advice in trying to diagnose this PITA clunking sound. About a month ago I started hearing it from the driver's side whenever going over uneven surfaces. Got under her one evening and everything felt nice and tight. Removed the sway bar completely and the sound was gone. I read on...
  10. WK Grand Cherokee & XK Commander Forum
    I'm looking to replace my '05 Wk front sway bar bushings and have realized that since 2005, there has been an update on the bushings and brackets. I believe that: 2005-2006 Wk's had the 30mm bushings with the 'flat' brackets. 2007-2010 Wk's had the updated 33mm bushings with the new center bead...
  11. TJ Wrangler Technical Forum
    So I have this problem when I turn there is a bang/pop noise from the front driver and passenger side of the jeep. It sounds like it is coming from the wheel area but not exactly sure. I haven't been off roading or doing anything crazy in the jeep, just driving it normally. This has just...
  12. ZJ Grand Cherokee Forum
    Hello, I'm new to the forum , but need some help with my stock ZJ. I recently had the death wobble and replaced a loose tie rod end. Put everything back together and drove around fine for a month. Now it seems to be wobbling a bit again when the road curves around to the left. Not on a full...
  13. JK Wrangler Technical Forum
    I have an rev 2.5" lift, and I'm tired of wrenching to disconnect my sway bar. I have the geometry brackets and I was wondering if there is a stock sized quick disco, or if i were to get discos for a 3" lift and took off the geometry bracket if that would work. Thanks.
  14. XJ Cherokee Technical Forum
    Hey all! So this is my first post here.. And I need some advice/diagnoses of what could be causing an issue with my 1998 Jeep Cherokee Sport. A little background: About a week ago, I was T-boned by a motorcycle going ~50 mph. The bike hit my rear driver side door/tire. Everyone walked away...
  15. JK Wrangler Technical Forum
    So I have a friend of mine that took their Rubicon JK this past weekend and had some issues. They went to go release the sway bar and it never disengaged, and they tried to turn their lockers on... no engagement. They asked me if I had any input but I don't have a JK or a Rubicon, my rig is a...
  16. TJ Wrangler Technical Forum
    My sway bar links were shot and had to be replaced. I've loosened the nut without problem, but the bolt is fused with the rust to the sway bar. This is a 97 TJ and it's lived thru midwest winters. Lots of things are rusted together. I took the sway bar off, with both links dangling from the...
  17. TJ Wrangler Technical Forum
    Is anyone using rear sway bar disconnects? If so, how does it handle on the trail with no sway bars connected (assuming you are disconnecting the front also). My TJ is lifted 5". I recently changed my rear sway bar to a larger/stiffer one to handle winds (and my dog moving around in the back)...
  18. Trailers & Towing
    I just took delivery of a new 2014 Summit 4WD EcoDiesel w/factory tow package and I love it. I will be taking several trips ranging from 700-1000 miles all east of the Mississippi, and I need an enclosed trailer. I'm looking at a trailer with the following specs; Enclosed V-nose GVW of 2340 lbs...
  19. Vendor Giveaways
    My last thread for the rear sway bar went great. After some discussion, we have decided to move onto our next part. We are looking for TJ owners who are still running the stock front sway bar, and looking for a set of end links with our quick disconnects. If interested please send me a PM and...
1-19 of 68 Results
Top