Search Results for ‘sway bar link’

Rancho®'s Adjustable Front JL Quick Disconnect Sway Bar End Links quickly detach at the lower mount to instantly improved off-road performance. Quickly disconnect the lower Sway Bar End Link and swing it up out of the way for unhindered axle articulation while off-roading. Pivot around the OEM...

I ordered a replacement steering stabilizer bar link when the ball joint on mine came out of the socket. Because this is the second wrangler that had this same problem, I went with upgraded one that was only $20 from rockauto more hoping for maybe some added durability. The part itself I...

I need some advice in trying to diagnose this PITA clunking sound. About a month ago I started hearing it from the driver's side whenever going over uneven surfaces. Got under her one evening and everything felt nice and tight. Removed the sway bar completely and the sound was gone. I read on...

I installed my IRO Benchmark lift over the past weekend and noticed that my rear passenger sway bar link is rubbing the coil. It doesn't make any noise unless I hit a bump. There is about an inch between the two parts on the driver's side, so I know it should be shifted over. I got the rear...

So the rough country sway bar disconnects that have been on my jeep since I bought it have finally given up. One side was welded together the threads stripped, the other one the bolts fell out of. My question is, with the way the metalcloak sway bar disconnects are made, will they be noisey...

My sway bar links were shot and had to be replaced. I've loosened the nut without problem, but the bolt is fused with the rust to the sway bar. This is a 97 TJ and it's lived thru midwest winters. Lots of things are rusted together. I took the sway bar off, with both links dangling from the...

I'm in the market for sway bar disconnects and wanted to know what everyone had success with. My TJ has a 2" lift so I need something to fit in the right range. My question is have people had luck with the adjustable links, that expand to cover a range of lifts, or better luck with a link...

My buddy is lifting again and willing to pass on his sway bar disconnects for his 4" lift. I currently have 3" of lift (2" BDS springs and 1" shackle lift), will the links for the 4" lift cause problems? My instinct says no, because lifts are installed all the time without longer links, but I...

So my girlfriend's 2000 XJ has been having "death wobble" issues. After crawling underneath and finding the Sway Bar Link Bushings decrepit, getting them off and FINALLY removing the lower T55 bolt with a c-clamp and oversized socket I've made it to the easy part of installing new links...

Just installed some 2" coil spacers and skyjacker hydro 7000 shocks. Didn't realize until I was installing them my sway bar will be pulled down at a different angle now. Is this a problem? I see that you can buy longer links, are they really needed though for a 2" lift?

im not sure if im posting in the right section so lmk ...I cant get the new sway bar links to install on my xj. one link fits in the sway bar but the other is to high i tryed pulling on the sway bar but cant get it to come down far enough to get the boot and nut on the link any ideas ? these are...

I have a '98 GC. The front left sway bar link broke. The ball joint comes out of the socket. I got most of it off, but the ball and the threaded bolt connected to it are stuck in the end of the sway bar. Any suggestions on how to get it out? I got a Pitman arm puller, but it ended up being...

On my sway bar the bushing came out (due to a stupid and careless mistake on my part) its still in good shape. I plan on getting some rc quick discos soon and until then i want to reinstall the bushing i have. Any tips? ive tried putting it on without taking the link off and no luck. I need to...

When offroading today i broke my sway bar Link on the drivers side. I purchased a new set from Quadratec.com and until then i want to remove the broken link. What is the easiest way to get the top link out of the sway bar? Any help will be greatly apprecieated.

what are anybodys recomendations on installing quick disconnects with only 3 inches of suspension lift? any recomendations on what brand to use? do they have sturdy adjustble quick disconnects so i dont need to replace them when i eventually add more lift? thanks guys any input is helpful! :help:

I have installed a 4 to 4.5" lift on my cherokee. I have an adjustable track and a set of quick disconnects for my sway bar. I have also lined my steering wheel back up by turning the steering linkage. My problem now is that when the wheels are turned to the right, my steering linkage (where the...

I have a 1998 TJ with a 3 inch body lift and 33" tires. I'm on my 4th set of front swaybar links! I just out new ones on 3 months ago (the greasable kind), they are oozing grease now. Does anyone know why this happens and any recomendations how to prevent this problem?:mad:

the other day i was driving and i heard a metal on metal clunk sound and i looked up the jeep and i didnt notice anything, now today i climbed back under there and was looking around and seen this my driving still feels the same as before it was broke i was wondering can i pop it back in or...

I was getting my gear oil changed in the front/rear for the warranty to be valid with my gear change. While it was up on the rack I noticed that the bottom left bolt for the sway bar link was gone. The only thing I can think of is that somehow the bolt broke since the nut is a lock nut. It’s...

I have the JKS Quicker Disconnects. The driver side lower attachment point which is a piece of metal that extends forward below the coil spring broke off while wheeling this weekend. I guess that I didn't notice it at first and the broken piece of metal and the JKS attachment that bolts on...