Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. YJ Wrangler Technical Forum
    I'm a motorcycle mechanic who just bought a clapped out 87 yj a few months ago. I have a 4.10 rear with 33" tires and about 5 inches of lift with 9000lb superwinch but pretty much everything else is stock. I did the nutter bypass (kept breaking starters when advanced to 8 deg so retarded...
  2. Engines & Drivetrain
    Hi all, My 2000 xj had a cracked head and low oil pressure, long story boring I've replaced 3/4 of the motor (head, main and rod bearings, oil pump, lifters, arms, rockers) still couldn't fix the low oil pressure problem. The last possible cause could be the cam bearings so now that I'm stuck...
  3. TJ Wrangler Technical Forum
    I am thinking about putting a stroker kit in my 2000 wrangler 4.0 I6. Would this increase my fuel mileage or hurt it? Thanks,
  4. TJ Wrangler Technical Forum
    I came up with the idea to build a 4.6L stroker for my 1998 Tj4.0L daily driver on Sunday night 1-30-11. I started looking for a motor on craigslist that night. I found a 1992 Cherokee for $400. Monday 1-31-11 I went to look at the Cherokee and ended up buying it for $340. Tuesday 2-1-11 I...
  5. TJ Wrangler Technical Forum
    I am wanting to stroke my 99 4.0. I am a dummy in this area, I need some help. I am also tight on a budget too. I have seen this "poor man's" stroker parts list. This may be the route I go, but I need the guys here to give me some guidance. Is the list below sufficiant or any changes...
1-5 of 5 Results
Top