Search Results for ‘stop’

Just attempted a short drive cut shorter by stalling out on main street. Would not start again without gas pedal all the way down and priming the fuel pump multiple times. Would not stay running without staying on the gas. Also saw the rpm needle go crazy before stalling again after turning off...

I want to find a way to keep the JK front doors from swinging closed. There were a couple products on the market once-upon-a-time. I have the Armadillo Front Door Stop. It screws into the frame and holds the door open to a couple positions via different thicknesses on the metal bar holding...

XJ starts normally then when starting to move it does some "coughfs"and after that apparently everything is fine, but idle misbehaves, sometimes it gets accelerated others simply completely stalls, last drive whenever I got to complete stop the engine died, it starts back again normally until I...

Just had new tires installed on my 1994 Wrangler. It has the Gambler style OEM wheels which are 15x8 with 5.5 inch back spacing. For the YJ, I believe these wheels were included as part of the Renegade package. And, from the factory, they were wrapped with 30x15x9.50 tires. The tires I chose...

Ive got a 2000 TJ with 140k miles here in New England, I'm trying to remove the rear bump stop cups to repaint and add bump stop extensions for my spring install. Both of the bump stop bolts will back out about an inch and then they just spin and don't come out any further. I cannot see the top...

I live in the central valley of CA where it gets pretty hot. This last week I went wheeling up in the Sierra National Forest. I was headed up into the foothills right before a long steep climb up the grade into the mountains. I stopped to top off my gas tank when I had the problem. After getting...

I was driving my TJ earlier today and I turned off the music. I noticed that when I'd slow down to a read light or to make a turn, there was a clunking noise. I don't have lockers at all so I know it can't be that. I can't pinpoint exactly where it's coming from. All I know is that it doesn't...

I have a 97 TJ I just lifted it with the rough country 2.25 suspension lift and 1.25 body lift. i drove it around for a week before i put the tires on with no problems. I put 33x12.50 mud rovers on it. Now i have a grinding sound when i let the clutch out to back up. I also does it a little when...

im about to do this and I honestly do not know how just by placing a washer behind the bolt will prevent the rubbing....btw do i have to jack the jeep up when i do this.....i got 31x10.5 on 15x7 stock steelies