Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. XJ Cherokee Technical Forum
    So I'm building a skid plate for my 94 XJ, I want it to protect the oil pan area, transmission pan, and transfer case area. This is my outline so far any thoughts or comments? The red circles are spots for bolts where the "metal" plates will connect, and the purple hard lines are where the final...
  2. Vendor Display
    Our latest glide plate is for the TJ/LJ rear Dana 44. Helps you glide over rocks and not get hung up. Check with your local retailers on pricing. :)
  3. TJ Wrangler Technical Forum
    So the Wisconsin winter roads have taken their toll on my frame and the tran skid plate ripped through the frame leaving me a nice big hole in the bottom of my frame. I think its beyond repair, and I dont know how comfortable I am riding on a patched up frame. Im going to be doing a frame...
  4. TJ Wrangler Technical Forum
    So I decided to take my skid plate off because I saw a nutsert hanging down a little farther than it should and low and behold, I found some good frame rot. Its a 2001 and has spent its life in the northeast. It has 155,000 miles on it. So what are my options? I've heard of Safe-T-Caps and...
  5. TJ Wrangler Technical Forum
    Looking to make my own tranny skid plate (tummy tuck) but I can find any I like. Post whatever you got on your jeep that's not the original transmission skid plate . Write ups and pictures thanks,
  6. YJ Wrangler Technical Forum
    ive been working on my 94 yj for a few weeks now, rebuilding the frame and redesigning some things, i wanted to be able to unbolt my skidplate without my drive line dropping, i decided to re-purposed my old rear track bar and it seems to work very well, my thought is that now if i needed...
  7. Skid Plates
    Product Information Price $50 Average Price $54.33 Manufacturer Fabtech Recommended Yes: 2 / No: 0 * Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited * Black powder coat * One-piece, welded unit is 1/4" thick * Bolts...
  8. Jeep Picture Requests
    i saw a diagram on of the fuel tank skid and looks like what i have on my jeep. so i'm not a 100% sure if i have the skid plate or not (i don't have UC). can someone post a picture of the factory skid for the WJ. or a picture of one that you know for sure you don't have a skid on.
  9. TJ Wrangler Technical Forum
    I have a 2002 Wrangler Sport with a bad fuel pump. I sprayed all the bolts with crc. The front bolts were very rusted. When trying to unbolt the front gas tank skid plate bolts in order to lower the tank, two of these bolts broke loose at the top (apparently the CRC didn't work). They just spin...
  10. TJ Wrangler Technical Forum
    I'm looking for past experience and guidance during the install Okay, so this weekend I'm planning on installing the UCF Deep Cover Skid System and I'd like to have everything I need at my finger tips prior to getting started. The parts I have: Ultra High Clearance Skid Engine Skid with...
  11. TJ Wrangler Technical Forum
    Really need to invest in an oil pan skid for my 2.5L. Looking to spend around $200. Seems like the only option out there is the Warn for $170, heard good and bad about this skid, seems like it uses fairly thin sheet metal but I suppose its better than nothing... Opinions?
  12. TJ Wrangler Technical Forum
    I just figured I would share my experiences from today. I got everything mounted up ready for my UCF engine skid install and I have some interference between the top of the skid and the downpipe from the exhaust manifold. Here's a pic: If you look close enough, you can see where I marked on...
  13. TJ Wrangler Technical Forum
    i need to make a steering box skid for my TJ. whoever did the conversion didnt use a stock steering box mount. that means that the bolt on steering box skids MADE FOR RHD TJs are useless to me. no big deal, i like a challenge. my question is this: do i make the skid easily removable by bolting...
  14. TJ Wrangler Technical Forum
    Anyone tried it yet? Jeep TJ High Clearance Skid Plate
  15. TJ Wrangler Technical Forum
    I'm looking at buying this as much next purchase, if and only if I can run it without investing in a SYE right now. Will it work with my 2.5" suspension lift? Under Cover Fabworks, LLC - '97-'02 TJ Transfer Case Skid Plate (No Body-Lift Req'd)(Carbon Steel)
  16. TJ Wrangler Technical Forum
    Im looking into what will be the best tummy tuck for me. i was looking at two tummy tucks so far. the rokmen package to get the tummy tuck and the gas tank will cost me around $960 shiped and savvy for the same thing and the shifter cable will be around $1550. Im looking for advice on these and...
  17. TJ Wrangler Technical Forum
    Hey im looking to get some skid plates for my 06 wrangler sport, but i dont feel like spending hundreds of bucks, couldnt i just cut a steel plate and bolt it over my gas tank? or is there more to it?
  18. TJ Wrangler Technical Forum
    Just a quick question I can not find anywhere... not even google images.... Does the newer style Warn gas tank skids have the dimple for the fuel pump in the middle of the skid?? Thanks!
  19. TJ Wrangler Technical Forum
    I used to have a TJ with a Rubicon Express 3.5" lift and 33s and don't remember what the clearance was at the transfercase skid plate. I have a Jk sport with the stock 32s and want to now the difference.
  20. TJ Wrangler Technical Forum
    Mine is pretty rusted, one corner is pretty much rusted through. Any suggestions for the normal stuff, the web sites and price? I've read some people coat their new skids to prevent rust.... any problems with doing this?
1-20 of 24 Results