Search Results for ‘rotor’

I'm trying to buy all the parts I need to replace my front and rear brakes, buying from Rock Auto. I'm trying to figure out if my rear drums are 9" or 10". I have a '94 Laredo with tow package, if that helps. Or if y'all could tell me how to figure it out, thank you! Also if y'all have...

Hi all, I just replaced the front bearings on my 2005 wk. I had some help and got it done in about 4 hours or so. I figured I would at least share some info pictures and video on my project so others can ask if they have questions. I am not a mechanic, but I can at least give you my...

looking for a specific brake rotor. Not sure what it originally came off of but it is now on a 2000 Jeep TJ. When I bought the jeep it had this rotor on it. By the book this model jeep had a rotor that slid over the hub assembly. Mine has a spindle tube and the bearings are in the rotor. The...

Hopefully someone here can provide me with some clarifications on my problem. I started hearing some faint "chirping" sound coming from the distributor cap area about 2 weeks ago when my Jeep is idling. The chirping will increase as I press the throttle. Then today, the chirping became more of...

so I just bought my first a jeep a fully loaded gc limited with quadra drive, after getting it stuck and finding out my 4 wheel all the time wasn't working I went right to the dealership and got the fluid it drained and filled the transfer case 4x4 back in business, long sotry short, I need...

I've got an '04 GC Laredo 4X4 with a squeak. It's a rear drivers side. It only happens when driving forward or making a right turn. I don't get it in reverse or during a left turn. If I put the whole back end up I can tell it's coming from the rear drivers tire. I've replaced the caliper...

My 2.5 motor was running too rich, then it gradually started not starting while warm... eventually it started stalling, and after a while completely stalled and would no longer start at all. Replaced Fuel Injector, checked all fuel lines. Then I determined that it jumped time, because on number...

I am fixing up a 1980 CJ5 with the GM 151 4-cylinder engine. The engine overheated while driving and turned off as I coasted to a stop. The engine will not start but does turn over and is not seized. I checked the plugs and was not getting a spark. I pulled the distributor cap and the...

Hey all. I'm having the most difficult time getting to a rusty rotor on my 79 cj7. I was wondering if anybody could give me some step by step directions so I can get on with the project. Also, if you could give me a list of tools that I need that would be great. Thank you for your help!

Hey all. I'm having the most difficult time getting to a rusty rotor on my 79 cj7. I was wondering if anybody could give me some step by step directions so I can get on with the project. Also, if you could give me a list of tools that I need that would be great. Thank you for your help!

'08 Sahara, 30, 000 kilo's. Lifted 4inches about two years ago. I came home the other day and noticed a very strong burning smell. I believe the driver side rear caliper has siezed or is siezing. The wheel itself was too hot to touch!! Upon further, wheel on, inspection I am noticing that...

So last thursday as i left work, i drove through a puddle at about 20mph. immediatley after the jeep died, no sputtering (as would occur if the fuel pump went out or i ran out of gas) it just cut out. I got out and checked underneath and the four wires going into the O2 sensor were ripped out...

I am in the middle of changing the pads and rotors on my 1999 wrangler sport 6 cyl. I cannot seem to be able to take the rotor off the passenger side. The clips are off, I have used penetrating oil, beat it with a 5 lb hammer and even tried a puller but it is still stuck fast. It has not been...

Please help: I decided to replace spark plus, distributor cap, distributor rotor and plug wires today. For the life of me I cannot figure out why the distributor rotor is breaking when I try to start the engine! I took the old one off, put the new one on - that's it! I cannot figure out a way...

Ok by process of elimination I know now I don't have a stock front end. I do however need to find some pads, calipers and rotors. Is there anyway anybody can tell me where what who or how to figure this Dana 30 out? To the best of my knowledge it has all AMC parts on it. My ordeal started with...

I tried to swap out my caliper and rotors yesterday along with the pads...After a long day and three part stores later I still can't find the size. The rotors do not match up nor did the pads... The caliper brackets were stamped with AMC, tried looking in other Chrysler products around 91 as...

It's time for a new cap and rotor. I'd like to drive to one spot and be sure I'm going to get a cap and rotor with brass, not aluminum, contacts. Any suggestions? Thank you.

I need to change the brake pads and brake rotors on a 2002 Wrangler X. I went to the autostore and the had 78mm tall and 82mm tall rotors, which was are the correct size? Is changing the rotors and pads a relatively simple task?

I am working on installing an Aussie Locker in my front Dana 30, and I am encountering a few obstacles. I removed my brake calipers, but my rotors just will not come off, even with a sledge hammer. Does anybody know a trick to get 'em off? I'm pretty sure they are the original rotors from 2003.

I just received a set of centric premium rotors and ebc green pads. How difficult is it to change out the old rotors and pads myself ? How much would a mechanic usually charge for such a job ? I am mechanically inclined, I swapped out a rear bent drive shaft, installed my body lift etc. Any help...