Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. WK Grand Cherokee & XK Commander Forum
    I can’t seam to find any recent posts on where to get one of these here in the U.S. for a WK CRD. There is only one of these being offered on EBay and it’s from the UK. If anyone has this mod to bypass the swirl motor on a 06-08 WK CRD model, can you tell me where to go to get one of these...
  2. Jeep CJ Forum
    I was searching for information on LEDs through this site and others and started to realize I was spending more time reading through partial or wrong information rather than just figuring it out for myself. In this quest to resolve LED conversion on my '79 CJ7, I wrote up the solution I landed...
  3. KJ Liberty Forum
    Spent better part of 2 hours last night trying to get the harness free from the resistor. Got the little red clip to pop out but could not get the harness free no matter how hard I pushed on the little black clip. Called a mechanic friend and he is saying I need to cut the old harness out and...
  4. Audio, CB/GMRS/Ham Radios, GPS, & Electrical
    Hello...a few days ago my fan stopped working. The AC and Heat still worked, it just did not blow. Tonight, I replaced the blower resistor and to my delight the fan was blowing perfectly. Except...I quickly realized I could not turn off the fan and it is blowing as if was on high. If I move the...
  5. Full Size Jeep Forum
    I lost the fourth speed (high) on my heater. A/C works on high but not heat so that tells me that it's not the switch. At least I don't believe. Which leads me to believe that it's the heater blower resistor. Just a simple question lol....where is the heater blower resistor located exactly on...
  6. KJ Liberty Forum
    2007 4x4 Liberty (used, condition/maintenance prior to ownership is unknown) My heater stopped blowing on all fan speeds a couple days ago. I changed the resistor Tuesday evening. (Today is Thursday) All seemed to be working normally after the change that Tues night, and into most of the day...
  7. YJ Wrangler Technical Forum
    When I turn on the heat, it only blows hot air when I'm driving. If I'm not moving I don't feel heat coming out of the vents, so I know the heater core is fine. How can determine it is the blower motor or a resistor? I don't know much about this so any input would be great. If anyone knows of...
  8. Full Size Jeep Forum
    Hello FSJ friends, My 87 GW had an overtorqued mounting bolt for the alternator that gradually backed it's way out during a long drive. The alternator belt was squealing and I pulled off to check it. As I was slowing down, the bolt made contact with the fan, making a helluva racket. Luckily...
  9. JK Wrangler Technical Forum
    2008 Wrangler blower motor doesn't work at all. Used the day before, heat blasting, no issue. Also, the hazard lights do not work when the jeep is running but work when it is off. Was going to try the blower resistor but will be a couple of days before I get it. I already replaced the blower...
  10. TJ Wrangler Technical Forum
    So I only had one fan speed on the AC working and decided to replace the resistor. All speeds work now, but my headunit no longer works, and when you turn the key back (as opposed to forward to turn it on) none of the auxiliary electronics work (stereo, dome light, etc). Any ideas? Is there a...
  11. TJ Wrangler Technical Forum
    My TJ seems to have an electrical gremlin some where and I can't figure it out. When I turn any of the dials for my HVAC system, nothing happens. So far this is what I have done... 1. Replaced the blower motor resistor (worked for about a month, then stopped again) 2. Replaced the blower...
  12. XJ Cherokee Technical Forum
    Greetings Jeep enthusiasts, Synopsis: What can cause an air conditioner that has worked for years to suddenly cool at slightly less than outside temperature but not at 58 degrees or whatever the ideal target is? I have a lifted 2000 Cherokee Sport and I love it. It is my second Cherokee Sport...
  13. WK Grand Cherokee & XK Commander Forum
    Hello everyone, I have an 05 WK and just recently all of a sudden the Heater/AC completely stop working. I have no fan on any speeds or settings. I have checked all fuses and relays and also replaced the blower resistor. Any thoughts on what it may be? Your input is very much appreciated...
  14. TJ Wrangler Technical Forum
    Ok, newbie here. 99 Jeep Wrangler - 6 cyl My heater stopped working all together, 3rd speed heat setting has never worked, 1,2, and high always have. A week ago, 1 and 2 went bye bye leaving only high blast, yesterday high blast not working. Read the forums, replaced the blower resistor (old...
  15. JK Wrangler Technical Forum
    Hi so I upgraded my JK today with new LED Lights, They are the following - Recon front LED turn signals pair - Link Recon side fender LED markers - Link In-Pro Car Ware Rear LED Tail Lamps pair - Link In-Pro Car Ware 3rd Brake Light LED - Link Now I understood the IPCW Rear Tail Lamps...
  16. TJ Wrangler Technical Forum
    On my 97 TJ the motor blower resistor Connector is melted. I'd prefer to get a new pigtail rather than soldier. The part is discontinued from the dealership. He said other parts suppliers would have it. He said the 97 is a left hand drive connector and that 2003-2006 TJs use the same connector...
  17. Audio, CB/GMRS/Ham Radios, GPS, & Electrical
    I just bought a 99' Jeep Wrangler Sahara. I noticed that when I used the heat it would only blow on the "high" setting. I figured it needed a new blower resistor. I got into my jeep and tried to turn the blower on and nothing. I checked the fuse, it's good. I'm wondering do I just need to get...
  18. XJ Cherokee Technical Forum
    Replacing my blower motor resistor because of Fan Speed 3 being inactive and intermittent operation of the blower motor. Noticed that my connector was a little melted and one wire was loose from connector. Wondering if it is a good idea to replace the connector but haven't found a webplace to...
  19. TJ Wrangler Technical Forum
    After reading through this site, I believe that the reason my ac fan only works on the two highest settings is that the blower resistor needs to be replaced. I am technically challenged... :confused: so can someone please help me figure out what the resister is? Does anyone have a picture...
  20. TJ Wrangler Technical Forum
    Ok, you guys may not care one bit about my A/C problems which I understand as there is alot more to read about on here. First off, I'm not an A/C guy. Performance, exhaust, and some suspension is what I know. Here in Florida it's HOT! It's not that it doesn't work it only works on the 3rd...
1-20 of 30 Results
Top