Jeep Enthusiast Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 214 Results
  1. Jeep CJ Forum
    Hopefully I'll still be driving Jeeps by the time I could afford a project like this... I have a vision of a transparent jeep. Most of the time it's just the tub and top that are clear, all the internals probably need to be made of whatever they're made of for stress and thermal reasons. It's...
  2. Jeep Liberty Forums
    Is there any way to replace the heater core from inside the engine compartment when replacing the motor on the 05 liberty?
  3. ZJ Grand Cherokee Forum
    [Edited because I have a Dana 35, I'm dumb] Old faithful has left me stranded for the first time in 190k miles of reliable service. My rear end blew up. I haven't opened it up to see what happened (that'll be another post), but it's safe to say my rear is not going to be salvageable. I'm going...
  4. Jeep Cherokee & Comanche Forums
    Just bought a 1988 Jeep Cherokee yesterday, today the driver's side seatbelt buckle broke. It won't click in. My question is if I can swap it out with one in the backseat? Or if there's a way to fix it. I've called all the junkyards in my area no one has a replacement. Checked on line and...
  5. WK2 Grand Cherokee Forum
    Hello all. This can be an extremely helpful thread for for all the DIY JEEPERS. When you do a repair or perform challenging maintenance - PLEASE share your how to, tip, instructions, and an idea of how easy or hard the job was. Pictures are always a great help. techauthority.com offers one and...
  6. TJ Wrangler Technical Forum
    I have a 04 wrangler and lost my only set of keys. I have seen that a dealership might be able to make one for me with my VIN and registration but my registration is expired at the moment. Are there any options I have at getting my jeep key replaced and making replacements?
  7. YJ Wrangler Technical Forum
    I checked all my pulleys with the serpentine belt off and my idler pulley is loose and rattling It's not making noise when running but I want to replace it since it's on its way out. Why is it so hard to find the part number for the bearing? Are they even replaceable? Or do I need to buy a...
  8. KJ Liberty Forum
    Hey fellow Jeepers. I have a '07 Jeep KJ that has the classic cloth seats that are easily stained even by water. Any ideas on DIY cleaning methods or having it done professionally? The front seats aren't the most comfortable and are beginning to wear out but haven't had any luck finding new...
  9. Jeep CJ Forum
    In my efforts to restore the doors for my '78 CJ7, I ran across an issue of trying to find some replacement parts for the door glass. Searching online it seems the little piece of plastic is called the regulator grommet. It's the piece that snaps into the glass and allows the regulator slide...
  10. Jeep CJ Forum
    I'm replacing the worn out rubber bushings on my CJ7 with some new prothane bushings from energy suspension. In the instructions, it says that the old metal shell from the rubber bushings must be removed but it doesn't say anything about replacing it with a new one. Do the bushings go straight...
  11. Engines & Drivetrain
    I have an 04 WJ with the 4.0I6 my regulator for the alternator just went out and I am looking to go up on power output so I don't have the "dancing" lights I have been. I have read that I can replace it with the alternator for the 05 Durango with the 4.7l v8. Problem is I don't know which one to...
  12. TJ Wrangler Technical Forum
    Hi GUYS ! So where is the best place to get a windshield for this vehicle? 1999 Jeep Wrangler Sahara .I think I can replace myself just want where I should buy for the best value. This is my first post and I am buying this vehicle tomorrow ! :smile2: First Time Jeep Owner!
  13. JK Wrangler Technical Forum
    My dad and I are going to have my son's engine replaced. It is shot. We did it before with my car... does anyone have any ideas where to look for an engine. I see Ebay has them. I am located in SoCal. Wrangler X 2010 automatic 3.8L V6 Thanks for any suggestions.
  14. Engines & Drivetrain
    Hello everyone. I have a 1978 CJ-7 with the ole standard 304. I have what I believe to be a factory correct Motorcraft carburetor that is shot. Can anyone give me some advice on what make/model of carburetor to replace it with? I do not need anything extremely high performance or anything...
  15. WK Grand Cherokee & XK Commander Forum
    The current armrest I have, the mesh netting that holds stuff is very loose and doesn't do its job. I want to get rid of it and put something different in but I don't know what else I can put in there. Any ideas? Its the hinged part that your arm rests on. Not the actual bin inside the armrest...
  16. WK Grand Cherokee & XK Commander Forum
    Some may know that I run the YouTube channel, My Jeep Story and on that channel, I do some product installations and other videos based on my WK. Moving forward, I will start doing what I plan on doing tonight for most every product and video by posting up here for other discussion. JeePerf...
  17. TJ Wrangler Technical Forum
    Both my 2001 Wrangler and 1997 XJ have the same issue, with the factory 'leather' steering wheel. It's worn down pretty good, past the finish I suppose. If my hands are wet, I get black gunk on them and the wheel turns sticky. Armor-all helps, a lot. Until it gets wet again. Is there any...
  18. TJ Wrangler Technical Forum
    I have a 2003 wrangler and about a year ago, i lost one of these little bumpers from the soft top. I can't seem to find anywhere to buy a replacement without buying a whole new frame. I have seen a similar bumper but for a jk wrangler soft top, not sure if it would fit the same? Anyone know of a...
  19. YJ Wrangler Technical Forum
    Hello everyone, I hope all is well. I have been having a loud noise coming from underneath my jeep when i up shift, loudest shifting to 1st from a stop and from 1st to 2nd. It has started to make the sound up shifting into higher gears lately although not as loud. Took it to a shop i trust they...
  20. New Members/Introductions
    Hey guys! I'm somewhat new to Jeeps. I'm trying to replace my u-joints and managed to break the c-clip in the yoke. I managed to get one side out but the other side there's no longer any tabs to take the c-clips out. I've tries wd-40/PB blaster, flame torching it, hammering it out with a screw...
1-20 of 214 Results
Top