Search Results for ‘remove’

This is a simple post in case it helps anyone save some time in the future. My door panels had a couple of loose parts and I needed new clips in there. Looking around the internet it seems that there have been many colours of clips and it took me a good while to work out that the general...

I just got an OME 3" HD lift. Will taking off the front sway bar give me more articulation/down travel while off road? Besides body roll, Would there be any negative repercussions from leaving the sway bar off during every day use? Thanks!

Hey guys, Been hearing some scraping, squealing and now clunking coming from my transfer case. Fluid is normal. Pretty sure, the chain is coming off or came off. Anybody got a write up or tutorial on how to safely drop my transfer case and service it? I have an auto tranny, in case that matters.

I am looking for pictures of someone's bumpers with the end caps removed. I want to see what it looks like. Please and thank you

So I have a 2000 Wrangler SE and I just got the brackets to move my mirrors in the mail today so I really want to take off my doors. I understand you are supposed to remove the bolts on the door with a T50 but that size doesn't fit in any of the bolts. So I'm not really sure what to do since...

I have an 06 (wk) 3.7L and I need to know how to remove the headlight assemblies 9driver and passenger side) NOT just the bulb, the WHOLE headlight assembly. I bought aftermarket headlights with projectors that I want too install and I couldn't find anything here or in the manual on how to...

Hey all. I'm having the most difficult time getting to a rusty rotor on my 79 cj7. I was wondering if anybody could give me some step by step directions so I can get on with the project. Also, if you could give me a list of tools that I need that would be great. Thank you for your help!

Hey all. I'm having the most difficult time getting to a rusty rotor on my 79 cj7. I was wondering if anybody could give me some step by step directions so I can get on with the project. Also, if you could give me a list of tools that I need that would be great. Thank you for your help!

Can someone give me details on how to remove the front and rear bumpers from a 1987 Cherokee Laredo? Also, how to remove the front grill? Thanks!

I have been using the site quite a bit to solve my low oil pressure problem so I thought I would post here my experiences and solutions- Problem: Oil pressure was at 17-19psi, no change at any RPM. Every start cycle was accompanied by a loud clattering sound from the engine. Finally the...

Ive removed everything except the filler tube and the exhaust. Is there a trick to getting this out? Ive yanked it as hard as my father and I can. Do I just cut the filler tube? or exhaust? Any actual help would be greatly appreciated. I cant find anything online. :confused:

I have a 3" body lift on my DD 04 TJ with 33s :rolleyes: Im probably getting a 4" "X" series (YSE and CV are a good investment?). Im staying with 33s because 35s and new axles, brakes etc are too much. Would it be easy to make my 3" body lift 1" or to just get rid of it entirely? Are the...

how do you remove the drum from a warn m8000?

Once upon a time, a regular nut was installed on my front track bar on the axle end. I've ignored it until now because I knew it would be a pain to get off. But now I have a new front track bar to install, so I have to get it off. How to I remove the bolt? I can't get a box end wrench in...

I have a 97 TJ that is used as a toy. Weekend trips around a small town and then goes to the trails. No highway use. Would it hurt anything to remove the sway bar or just permanently disconnect it? Pros vs cons....please Thanks BP

I need help trying to figure out how to get the hose off of the clutch slave cylinder I can't figure out how to get it off. There is like this pin kind of thing and I'm not sure if that is holding it in or what I'm kinda confused any help is much apreciated.

I am considering removing the 2" spacer lift that is installed on my '06 TJ. The biggest reason I am thinking about it is that I have been unable to get rid of a wobble I get when braking from 50-55 MPH. This Jeep rarely sees any off-roading anymore as my wife and I have had to cut back our...

I looked thru the write ups in the forum, but I'm stuck on removing the climate control panel slider cable from a 97 TJ wrangler. I removed all the contacts except the slider cable. It's attached with a metal hoop on a hook which I was able to slide off, but there is a red slotted retainer that...

hey all, I intended on removing all of my fenders today to paint them, however I was only able to get the fronts off. The rear fenders are bolted in using those dang rivet-style retainers however they have all come free from the body and are spinning in place. Any advice on getting these bad...

In the middle of my aussie install into my d30 and i ran into a problem. I have 3.07's so i do not need to remove the carrier i can but i dont need to. I tried to punch out the pin that holds the cross shaft for the spiders in and its almost out and the bit i was using snapped inside and it...