Search Results for ‘rebuild kit’

I've got a 2001 TJ Sahara that I've had since 2011. This past year it has started to have some shifting problems. Until the engine warms up, or runs for 15 minutes or so, it drops 1st gear and shifts hard. After about 10-15 minutes running I don't seem to notice any issues. I'm assuming the...

We have recently launched our rebuild kits for the control arms and track bars that use our D2 bushings. Check with your favorite retailer on pricing!! Thanks!

For the last three years we have been testing our D2 bushings in Moab Utah on rental Jeeps, and from coast to coast on trails like the Rubicon, Rausch Creek and other trails along the way. The toughest testing out there. The results? A bushing that absorbs up some of the toughest trails out...

For the last three years we have been testing our D2 bushings in Moab Utah on rental Jeeps, and from coast to coast on trails like the Rubicon, Rausch Creek and other trails along the way. The toughest testing out there. The results? A bushing that absorbs up some of the toughest trails out...

All I've pulled the carb and looking to rebuild myself. I've never done a rebuild before and need help from the experts. First, what all needs to be removed before immersing the carb in solvent? Second, what should be reused and what should be replaced? Do I need to replace the electric...

OK long time member here (read often, post very little) I have been searching for days for good info on rebuilding a rubicon case I just bought. (for the record it was very cheap) I am having alot of trouble because I am not looking for just seals and bearings, but gear train parts as well...

Hey Guys, Avid reader of the I6 258 rebuilds lately as i'm planning to complete this myself in the near future. I currently have the original 81' 258 in the Jeep, and my plan is to use a donor I found on Craigslist (this way I don't have an engineless Jeep sitting in the parking garage of my...

have some rod knock going on wondering if any one has had their 5.9l rebuilt and how much approx cost and time was involved??

This is what I am being charged for the rebuild of my rear diff. He said the bearings were all bad on my '96 Jeep ZJ Laredo 5.2L. Is this a pretty bad deal in your o-pinion? labor: 6.6hrs - $594 parts: $354.53 fluid: $13.60 Total: $985.54 :dunno:

I recently blew the motor up in my 2000 4.0L Wrangler. I actually threw a rod through the block. (I'm getting a motor from junkyard). So a friend of mine wants to rebuild it for me, instead of buying a remanufactured motor from a parts store. Has anyone done this? Suggestions? He also...

Hi again all. Got another issue that seems to be quite common amongst YJ owners. I did a forum search trying to find a solution but none of the results "I" found are exact. I purchased my 87 YJ just a few days ago and I've noticed the following: I smell gas almost every time I drive it. It...

3 months ago i bought an 87 wrangler yj...i've been working on it ever since...after a few days i replaced some gaskets and the exhaust and noticed that the motor had a knock from the lower half....since then, i've bored out the block and installed every part brand new or reconditioned...

I just bought a 1997 tj 2.5 that a guy stiffed my on but owe well. The rearend is bad and has electrial promblems. Where is the best place to get a rearend rebuild kit or where could i find a good used one. Also I need a under dash wiring harness will a 4.0 harness work. thanks for any help

I finally finished the one piece rear axle install, so I took her for a test drive. When I got back she was idling bad, so I turned it off. I popped the hood and they had gas coming out both sides of the carb, looks like between the carb and spacer. Since I will pull the carb to check why, I...