Jeep Enthusiast Forums banner
plate

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. General Jeep & Off-Road Equipment
    Hey all, I'm new to the Jeep life. I've come from wheeling NHRA super pro cars to now being a Jeep girl. Currently have my black JKU Recon and I'm in love with the sturdy bumpers on this sucker. I want to put a winch, 20" light bar, and a bull bar on the stock bumper. Right now a buddy of mine...
  2. Fabrication Shop
    Hey there howareya? Wanted to share with ya my mod of the TJ OEM license plate bracket. I wanted a plate that hugged the jeep and its curves :shhh: but I didn't want to buy an expensive bracket or drill any new holes in my TJ. I started looking at the OEM bracket and realized all I needed was...
  3. ZJ Grand Cherokee Forum
    When I last rebuilt my transmission, I had an issue when I got it back together. I thought that the Bolts that hold the Torque converter to the flex-plate were hitting the inspection plate. When it was in gear you heard a distinct clicking sound, it gradually got better and went away. Later on...
  4. YJ Wrangler Technical Forum
    Does the choke plate either lay flat when it's cold, and vertical when it's warm? Or does it set the choke angle on a gradient based on "how cold" it is. For example would it set the same closure if it were -20*F or 40*F? I always check mine in the morning before starting to see what it looks...
  5. ZJ Grand Cherokee Forum
    I'm missing my flywheel cover for my '94 ZJ 5.2L, 46RH trans.. I noticed it gone after I had the rebiuld on the transmission done. I was hoping I could find it at the shop that did the work, but no luck. I figured if I took it wheeling & mud or anything decided to get up in there, it would...
  6. TJ Wrangler Technical Forum
    I have a 2002 Wrangler Sport with a bad fuel pump. I sprayed all the bolts with crc. The front bolts were very rusted. When trying to unbolt the front gas tank skid plate bolts in order to lower the tank, two of these bolts broke loose at the top (apparently the CRC didn't work). They just spin...
  7. TJ Wrangler Technical Forum
    Where is Axle info, paint code , trans, etc.:confused: plate located in a 2004 rubicon
  8. TJ Wrangler Technical Forum
    I cleaned my TB the other week and I started noticing a metal-metal crunching feeling in my throttle pedal so I took a look at my TB. Inside the plate is scraping against the throttle body wall just where the pin that the plate is connected to meets. Some metal shavings were present too and I'm...
  9. TJ Wrangler Technical Forum
    Hey im looking to get some skid plates for my 06 wrangler sport, but i dont feel like spending hundreds of bucks, couldnt i just cut a steel plate and bolt it over my gas tank? or is there more to it?
  10. TJ Wrangler Technical Forum
    I used to have a TJ with a Rubicon Express 3.5" lift and 33s and don't remember what the clearance was at the transfercase skid plate. I have a Jk sport with the stock 32s and want to now the difference.
  11. TJ Wrangler Technical Forum
    I'm installing a JKS Body lift and Brown dog motor mount lift, in preparation of installing my UCF tummy tuck. I'm installing the original extra clearance skid, not the high clearance one. My question is, will I have any clearance issues with the exhaust hitting my upper control arm on the front...
  12. XJ Cherokee Technical Forum
    I just bought a 91 jeep Cherokee Laredo from a guy who tried to put an engine in it. from what I gather the old engine overheated and blew up so he bought a junkyard engine out of a 1995 jeep?????? He said he used the wiring harness and ecu from the 91. everything works correctly (fuel starter...
1-12 of 12 Results
Top