Search Results for ‘linkage’

Trying to delete this thread with instant emails

So here's the thing. My first problem is my jeep is an auto. Now that we have that out of the way, I have lost a bolt that goes to the linkage rod for my steering column shifter. Any idea where I can find this bolt without purchasing an entire linkage kit? Help!!

Okay so I have the style throttle linkage pictured in the attached images and this will probably be a quick and easy answer. I'm just not sure where the spring it's talking about in the instructions comes from originally. I don't recall there being a spring ever connected to the throttle linkage...

My grand daughter lives 800 miles away in Raleigh and her 1995 XJ has suddenly locked out 4th and 5th gear. If I were closer I'd probably tear it down and inspect the internal shift forks/linkage, but I was hoping(?) someone with regular hand tools might be able to pull the boot from inside the...

ive been trying to do a few things to my jeep, the main things rae to make my 4 low work properly i have tried to adjust it many time and it seems as iff i have the ability to have it in 4H N and 4L OR 2H 4H and Neautral, i cant seem to make all the gears work, so at the moment all i have access...

Hello everyone, Yesterday, my shifter disconnected from my transmission (42RLE) in my 2006 LJ. After hopping on WF this morning, I went to O'Reilly's and picked up the Dorman Help! #14041 kit of bushings. It supposedly only fits up to the 2005 Wrangler, but I picked it up anyway. The...

Hey guys, so im in the process of swapping a Chevy 350 with a sm465 and im trying to get my clutch linkage to work. the problem is it is not fully disengaging and i need more travel. my question is how can i fix it. I know a lot of you are going to say go hydrolic, but but it seems a little...

Can someone with the Currie Currectlync setup measure the length of their Tie rod? I need just the rod, not the ends. I have Rugged Ridge crap setup and bent the tie rod, just seeing if i could replace it with Currie instead. Thanks in advance!

I have a 92 Laredo which has 250K +. Engine runs ok, auto trans great, 4wd hi works great, but 4wd will not stay in Low, and it sort of feels like it may not be fully engaging. When I hold the lever up it feels like gear teeth are "skipping". I want to convert the old girl to farm use only...

About 8 months ago I installed a brand new redline weber 32/36 on my CJ7 4.2L. The linkage that connects to the throttle body to the foot throttle linkage is stiff. Its the linkage with the ball joint ends (the balls are tight inside the housing). I have soaked it in oil, spayed it with WD40...

Hi there, Got my first jeep about a month ago, a '93 YJ 4-cyl, 5-speed manual. Went to drive away, got up to 2nd gear, and the regular manual shifter (not the 4WD transfer case) went loose in my hand. I can still drive it, but only in 2nd gear, where it was when it broke. The manual 5-speed...

I ordered a new carb this past weekend and it came in today....damaged. :brickwall In addition to the choke being crushed, take a look at this pic. Don't you think the linkage is bent as well? Thoughts?

my town got its first snow this year so i obviously had to go and play in the snow with my jeep :D in doing so i was driving up a snow covered logging road and something didnt feel right, then i realized that my front wheels weren't turning. i had it in 4h and 4L neither made the front wheels...

long story short but was pulled over, motor running, parking break on, and in neutral. was distracted with person pulled over also and put into 1st gear engaged clutch quickly remembered parking break was on as I was in a rush to release the break at the same time looking for p.b. handle didnt...

I currently have a 2000 Tj but I'm looking to "upgrade" to a more built '97. The only thing I'm concerned with is the seller says that the "4x4 shift linkage needs repair." I've tried looking it up but most of the results I get pertain to adapters to fit lifts. I'm hoping someone can help me as...

So my throttle linkage is binding, when I depress the gas pedal it sticks at first and then when I let off it doesn't return all the way back. When I loosen the throttle linkage nut everything works well, but I know that the nut isn't supposed to be backed off the linkage so it isn't even...

So I guess this will be my first real right-up I have do that will HOPEFULLY provide some helpful info to everyone out there that has had enough with the complicated stock linkage or who has modified their drive line. Parts List: Will update as I go if needed 2 - 7/16" Ball joint rod ends -...

Transfer Case linkage... only one major solution you can do, buy Novak (looks like a great product) I myself was going to buy the cable shifter and stumbled onto this guys site. I couldn't find anything with great pictures like this guy has and such a simple solution.http://www.bsfab.net/?p=26...

I've had my TJ for about a month now and haven't had any problems until today. The problem is with my transfer case (I Think). I have a 2000 TJ Sahara with the 4.0 and an automatic transmission and 106,584 miles. Everything is stock as far as i can tell. Here's the problem: It was snowing...

I have pulled the transmission how can I tell if the synchronizer rings need to be changed, I had found yellow metal shavings in the oil. The tranny only had 15,000 miles since the rebuild by a shop. I was having shifting problems on the T176 1981 Scrambler. Which I had assumed was the...