Search Results for ‘lift + spacers’

Thanks for any information you have! I have a 08 wk 3.7 Laredo. already have a 2” body lift with 2” wheel spacers. I need to do shocks and wheel bearings all the way Around. And likely replace the a arms(bushings are shot and I did not have a good time replacing only the bushings.Did one and...

I had 245/65/17 tires on a 2007 jeep grand cherokee limited hemi and recently purchased some aftermarket 245/70/17 after receiving the "yes, those would work" from a Discount Tire place. I changed them out myself and upon pulling out for a test drive heard some rubbing while going...

Dealer build improper build need help so i have a 2018 jk Rubicon i bought . 3.5" lift 3"spacers,24x12 vision rims on a 40x15.50x24 tire,5.:13 gears, looks like stock control arms except does have front lower drop down brackets from the ranchO 3.5 lift thats on it...

May be a dumb question, but I'm looking into buying another ZJ, and the one I'm looking at has a 3 inch lift that the guy stuffed 33's under. Obviously there will be a lot of rubbing, so I'm wondering if it's possible to correct the problem by adding a budget boost. If so, how much of a lift...

Hey Everyone, I have a 2007 WK Overland 4x4 sitting with a 2 inch RC spacer lift and some Bilstein 5100 shocks set to the lowest height. I am getting a vibration coming from the front wheels when giving it some gas. I believe that it is tied into the fact that the angles of the axel is so steep...

I have a 94 Grand Cherokee Laredo, 4.0 in line 6, standard tranny. I want to give it a bit of height, but unfortunately I am on the ol "student budget" so the money is a bit tight. Is there any advice out there for a cheap lift? Preferably between 2"-4"?Performance is not a huge concern, I...

OK guys, I have a 99 XJ sport with stock height and I want to put some 31 MT MTZs on it. I know it's not high enough now so how much lift would I need to get to fit them? I don't want to do any trimming. The jeep is mainly for show. I already have a mud rig. This will just be something to cruise...

Got all new Bilstein 5160 shocks for the 10' Sahara 4-door. Looking to add a 2" spacer kit along with 33" MTR's. Anybody see issues with this setup? Thinking it may need 1" wheel spacers.

I have an 07 JK 2 door Rubicon. I'm looking for a cheap lift kit to just get a couple inches. nothing major. http://www.rustysoffroad.com/jeep-suspension/jeep-suspension-lift-kits/jk-wrangler-rubicon-07-jeep-suspension-lift-kits/rustys-jk-wrangler-2-budget-kit-includes-shocks.html I like this...

I have a 4 door Jeep wrangler unlimited and wanted to get a lift kit. I was thinking about 2' or 2.5' but I'm not sure how big of a difference that will make. Does anyone have pictures of a 4 door wrangler with a 2 inch lift? or a picture of any lift heights they want to share! I want it to be...

My 97 xj has a 4 inch rough country lift on it. It's beginning to sag a bit and I want it a bit higher. Would it be safe to add 1-1 1/2 coil spacers on top of the lift

Gidday, iv just brought my first Jeep a 99 mod sport XJ. And I'm in love with her, so I go down for some new tyres and I'm talked into 31's which look great but there is rubbing. So I buy a lift kit with heavy rear springs as I want to tow a big trailer, a 40mm lift! Which should end up a bit...

Hi All, I have an 03 TJ with a 4 liter, AT, dana 44 rear with LS, a skyjacker BB lift, and 31" tires. The jeep has 95k on it and the lift was installed about 40k ago. There were slight drive train vibes right after install on acceleration between 15 and 30 mph. Just last week I started...

Hi I have a 2010 Jeep JK 2-door SPORT stock and I drive it to school all week and around town but I want that cool lifted jeep look and be able to be a once a month weekend woarrior but I want to keep what little good gas mileages I get I will let go of a little but not much I dont want to run...

Im trying to decide wether to throw the bb on my jeep, if anyone else has this set up please post a picture, i have the 2.5" Rusty's coils and i wanna add 2" bb. Or uf you have something some what equivalent (HD coils plus bb, 2" coils plus bb W.E) THANKS!

Any of you guys suggest a pretty good lift kit for a decent price. its for a 2002 liberty limited. Also how high should i lift it. Any suggestions? thanks:cheers2:

So I'm installing a 2" BB soon and I ordered two different isolators (NOT spacer) the fronts are MOOG from RockAuto and I got the rears from IRO. The thing is, the MOOG ones are 4" in diameter and the IRO ones are around 3.75" diameter. If you place the two on a spacer, the MOOG one fully covers...

hey im new to buying tires ans wheel but i just put a rough country 4in suspension lift on my jeep wangler 97 it recommends a backspacing of 4.5 but the wheels im getting have a backspacing of 5.9 will that fit? or am i going to have to get wheel spacer if so how big? :confused: