Search Results for ‘lift advice’

My last post for today.....son is excited to get going! We want to put a lift on the 95 YJ (currently stock). We are looking at the Rough Country lift; either the 2.5 inch or 4 inch lift. Right now the price is the same; so any reason to NOT go with the 4 inch lift? Son wants to make sure...

Hi all, New here and gearing up to start my first lift on my WK. I was trying get as much info on the parts, mods, and tools I need to do to not mess up my WK. This is my daily driver, but having excellent 4x4 capabilities helps so much through the Ohio winters. Lots of freeway and city...

Koni Special Active shocks & HR raising springs? --Another Shock/Coil combination ? Hi All, I know there is a lot of information about which lift kits, shocks, and springs are best for certain applications, but honestly I'm going cross-eyed researching it all and I've likely come full circle...

Dealer build improper build need help so i have a 2018 jk Rubicon i bought . 3.5" lift 3"spacers,24x12 vision rims on a 40x15.50x24 tire,5.:13 gears, looks like stock control arms except does have front lower drop down brackets from the ranchO 3.5 lift thats on it...

Just got a 2006 XK. I wanted to know where I can find things like a snorkel and skid plates? can I search for Grand Cherokee and those parts will fit, including lift, struts, shocks etc etc? When I look for lifts I see spacers ( rough country) and kits with struts and shocks (dobinson) which is...

Bump Stop, Jounce Bumper, Suspension Bumper, etc....... I need to know what to order front and rear for a 2006 Laredo 3.7 WK. I am unsure what to technically call these things, but putting on OME md spring lift will I need extended stops or will stock ones work? I searched some old threads...

Sorry if this has been posted already, What do you recommend running for a lift to fit larger tires without much expense? I was looking at the rc 664 block spacer vs ome spring replacement for ~2" of lift Then for shocks bilstein 5100 in the rear but ??? in the front *This is for a 2006 3.7...

ok so I'm planning on upgrading my 79 cj5 and i want to know all that I'm going to need to get to complete this lif. I'm planning on going with the 4" from bds but will i need to get new drive shafts

I recently put a 4" suspension lift, 15" black wheels and 35" tires on my 2010 JK Rubicon and now I'm not sure what to do with some of the original stock parts. Mainly, the original silver wheels that came off it, but also maybe some of the suspension components. Wheels are still in relatively...

So I have a stock 2003 KJ and I want to put in a lift. I read somewhere that anything over 3-3.5 causes problems. But I have seen pictures of KJ's that look higher than that. I'm wanting to go with a Renegade or Baja look when I am done. I have already run into the issue of tires rubbing, but I...

I'm relatively new to the Jeep world and have been trying to build this on my own by ordering everything online and going to a local mechanic who does not usually specialize in 4x4. I feel a little lost. I'd like to know how high of a lift I have so I can answer people when they ask. More...

.

Hello, I have a 2007 WK and I would like to lift it, I was thinking of getting the OME HD lift but then I ran into the JBA 4 inch lift, they are both around the same price I don't care too much about the size of the lift I would just rather have the best one out of the two. I was just wondering...

I recently started experiencing the death wobble. I had my 2010 Jeep Wrangler Rubicon 2 door(stock) looked at and I was told it was because my alignment was thrown off which was caused by my shocks being worn out. I am having my alignment done and need to replace my front shocks(and steering...

I live on the Big Island of Hawaii. We have quite a lot of rocky nasty roads and trails (and steeeep; like 18% grade everywhere). I have three Libertys, but intend to lift one for going on these nasty roads. I would like to lift about 3 inches, more if there is budget for it, though. I have...

Hello all, I need some advice, I just purchased my Daughter her first car 05' Liberty it is all stock and the guy that I bought it from had put some "Geto" tires and rims, these need to come off ASAP. Everything else is stock. What I am looking for is advice on a lift that will get it off the...

Hey all, New to the forum so let me know if this needs to be posted elsewhere. I just ordered a 2016 Unlimited Rubicon Hard Rock from my local dealer. After chatting with them about after market mods I have decided to lift it and upgrade the tires. I am somewhat limited with my lift package...

Hey everyone, been a jeep forum lurker for years and finally needed some advice directly related to my personal jeep. I plan on getting a 4 inch lift soon with 33x10.50 or x12.50 tires soon. Haven't finished that mental debate yet... My question is in regards to SYE and CV shafts. I'm planning...