Search Results for ‘installation’

It's time to change my battery. The battery died after I parked the car for 10 minutes with the lights on, then I I noticed significant capacity decrease after jump-starting another car. Anyways, I have read that some people use H8 battery rather than the OEM spec H7 (group 94) batteries for...

Hey all, New to the forum - looking forward to everything I'll learn here. I've been replacing some front-end items in my '98 XJ - radiator, radiator fan, A/C condenser - all installed fine except the A/C condenser. The top metal line front the condenser popped in fine as the rubber rings on...

Hello, I was just gonna ask for some information regarding the installation of an NV4500 into my 95 Yj. I heard that you are required to purchase a body lift to be able to install the transmission into the jeep or else it will just not fit. Is this true? (Any additional information about the...

It's pretty widely discussed how bad the backup camera is on the WK. We recently bought a 2008 JGC Overland and the backup camera is almost useless. Having installed aftermarket head units and backup cameras in my 2004 Suburban and 2006 Silverado, I thought I'd take a crack at this. You have...

I have a 1992 Jeep Wrangler YJ and the front seat belt is very worn and it is a safety concern, so I bought a new set. This is the belt that I bought (Omix-ADA Rugged Ridge Retractable 3 Point Seat Belt), so it is very similar to the stock one I'm taking out. I found some posts that said it...

Greetings - How do i remove the plastic-cover on the a-pillars on my Jeep Cherokee 2.5 td (the model with the square headlights) - in order to run wires from a lightbar through them? Best regards from Gunnar

I recently had my T-176 get stuck in 2nd gear due to a worn out shift lever and 1st/2nd fork. I was able to remove the shift boot, clamp, retainer, spring and the lever to re-position the transmission back in to neutral. When placing the shift parts back in order I noticed the retainer has a...

I'm looking to install an amp that will fit under the backseat of my JK 4dr. For those that have done this, can you please post the name and model of your amp?

So when I got my 1992 Jeep Wrangler YJ it has no top or any hardware on it at all. What I want to know is what hardware do I need to buy? Should I just buy the hardware kit that goes for like $300 and thats all I'll need before putting on my new soft top? Or are there other pieces I'll need such...

I know that this topic has been addressed over and over through many threads and posts which were all very helpful to me, but I was never able to find any posts that addresses exactly where to drill out the holes for the rear of the YJ spreader bars when adding them to a stock CJ Roll Bar. I...

I did a lot of searching around and was unable to find a good writeup on an ARB compressor install for a location other than the second battery tray below the brake cylinder. I have a 99 TJ Sahara and it comes with ABS so the second tray was filled with the ABS junk. Short of attempting to rip...

I have a 2006 Jeep Grand Cherokee and have already bought some 265 pro comp xtreme all terrain tires as well as a 2 inch day star lift kit. I live on the border of raleigh and cary and would like someone or somewhere to lift it for me. What are some good places nearby that could help or anyone...

Hey all! As some of you may know, I recently have finished the installation of my Oracle CCFL Demon Eyes and they look MEAN! I love the feedback that I have gotten from them and have gotten some requests to do a write up, so, here we go! Before I start, I would first like to apologize for the...

Ok I have the xrc armor fenders on my jeep but the inner liner got torn off on my front passenger side. Trying to decide if I need to order a new factory inside liner or try to come up with something different. Does anyone have any suggestions on something different than factory liner? I didn't...

My '90 YJ came without a radio. No problem, I purchased a factory AM/FM to maintain a factory look. It appears that I'm missing a bracket because the radio is about 1" smaller all around than the dash opening. Secondly, does the radio mount behind the bezel (flush with the heater controls)...

Hey everyone hopeing someone can help me out. I just recently bought a 1984 Jeep CJ7 4.2 258 inline 6 as a project car and ive done alot of repairs already and am ready to install this HEI Distributor I just bought and i need a little advice as what to do. I just replaced the carburator...

Attempting to install my ome hd this morning and have had zero success. :thumbdown: All bolts are completely seized and rusted solid. Im a little upset about it, I really wanted to do the install myself but Im out of options. Ive contacted multiple shops for estimates. Has anyone had there ome...

Long time reader but first time posting. So I recently bought a 95 grand Cherokee with the 5.2 (46rh tranny). I bought it knowing the transmission needed to be replaced. I was lucky to find a professionally rebuilt transmission with under 1000 miles on it (They rolled the jeep the same week). So...

This is my write up instillation guide to installing a Pool Ball as a shift knob requiring minimal tools. :thumbsup: Tools Required: -Drill Bits ranging from 1/8-5/8 in size. (Preferably Masonry Bit but regular will do) -Power Drill. -Safety Goggles. -Sharpie. -Nut from OEM Shift Knob. -Epoxy...

Rear Hello, I am new to the Jeep Forum, Thanks for having me. My question is I purchased a 2.25 budget boost from 4wheelcustoms and I am in the process of installing. I installed the Rear spacers and the springs seem to be crushing in part of the ridge on the 2 inch spacer. Question #1 is this...